how to remove bathtub overflow cover

How To Easily Remove Bathtub Overflow Cover: Step-By-Step Guide

By Ashley Moore
AD

If you're trying to replace or remove your bathtub's overflow cover, you're not alone. Over time, these covers can become unsightly or damaged, necessitating a replacement. The process is quite straightforward and can be accomplished with simple household tools. Let's dive into a step-by-step guide on how to remove your bathtub overflow cover.

Before we begin, ensure you have the right tools and a safe working environment. Safety first! You'll need a flathead screwdriver, a Phillips screwdriver, pliers, and a tubing cutter. Additionally, it's wise to have a bathtub drain snake on hand in case of blockages. Now, let's get started.

Preparation: Understanding Your Bathtub's Overflow Cover

Bathtub overflow covers come in various styles and materials. Typically, they are either chrome-plated or made of plastic. Some may require unscrewing, while others might pop out with a bit of force. Understanding your cover's type and mechanism will help you approach the task effectively.

AD
How to Remove & Install Bathtub Drain Overflow Cover Made Easy
How to Remove & Install Bathtub Drain Overflow Cover Made Easy
How to Install a new Bathtub Overflow Plate Assembly
How to Install a new Bathtub Overflow Plate Assembly
Replace Your Bathtub Drain
Replace Your Bathtub Drain

Inspect the cover to determine if it's screwed in or pop-in (pressure-fit). If it's screwed in, you'll see screw heads around the edges. For pop-in covers, there might be small lips or retention clips hidden beneath the cover.

Removing Screwed-In Covers

If your bathtub overflow cover is held in place by screws, the process is simple. Here's what you need to do:

How to Replace a Bathtub Drain Stopper With a Lift-and-Turn Drain
How to Replace a Bathtub Drain Stopper With a Lift-and-Turn Drain
How to Seal Off Bathtub Overflow
How to Seal Off Bathtub Overflow
  • Turn off the bathtub's water supply to prevent any leaks from turning into a bigger problem.
  • Use a flathead or Phillips screwdriver to unscrew the cover. The screwdriver's tip should fit snugly into the screw head to avoid stripping the screw.
  • If the screws are rusty or stripped, use a little bit of penetrating oil and let it soak in for a few minutes before attempting to unscrew them again.
  • Once all screws are removed, the cover should lift off. If it's stuck, you might need to use pliers to gently pull it out.

The screw holes might be visible, but they can be filled with silicone sealant to maintain a clean, finished look.

Removing Pop-In Covers

Pop-in or pressure-fit covers are a bit more complicated to remove. Here's how to tackle them:

AD
  1. Starting with the top of the cover, gently pry it up using a flathead screwdriver or a thin, flat tool. Be careful not to break the cover.
  2. Once the cover starts to lift, maneuver the tool to the sides and continue prying until the cover pops out.
  3. If the cover doesn't budge, you might need to use a tubing cutter to cut around the edges of the cover.
  4. After cutting around the edges, the cover should pop out with a bit more force.

If the cover is still stuck due to damage or rust, you might need to resort to more extreme measures, such as drilling a small hole in the cover and using a leverage tool to pry it out.

After Removal: Cleaning and Preparation for the New Cover

Now that the old cover is out, it's time to clean the area and prepare for the new cover's installation.

Use a bathtub cleaner or a mixture of baking soda and vinegar to scrub the area clean. A drain snake can help remove any blockages and ensure smooth drainage. If the area is rusty, a rust remover might be necessary.

AD

Measuring for the New Cover

Before purchasing a new cover, measure the opening in your bathtub where the cover was. This measurement should include both the inner and outer diameters of the cover.

Once you have the measurements, purchase a new cover that fits these dimensions. It's essential to get the right fit to ensure proper drainage and to prevent leaks.

Different Types of Bathtub Overflow Covers

Bathtub overflow covers come in various types: brass, chrome, ceramic, plastic, and more. Each type has its advantages and disadvantages in terms of durability, appearance, and maintenance. Research each type to decide which one best fits your needs and bathroom aesthetic.

AD

Additionally, you might want to consider different styles, such as push-pull, spring-type, or flip-type covers. Each style has unique operating mechanisms and may require specific installation steps.

Now that we've covered the basics of removing and replacing bathtub overflow covers, it's time for you to embark on your DIY project. With the right tools and knowledge, you can confidently tackle this task and enjoy a clean, functional bathtub. Happy renovating!

AD