how to remove baldwin front door handle

How to Remove Baldwin Front Door Handle

By Nicole Young
AD

Are you tired of the old Baldwin front door handle that's causing more trouble than it's worth? Maybe it's broken, or perhaps you're just ready for an upgrade. Removing a Baldwin front door handle and replacing it might seem like a daunting task, but with the right steps and a little patience, you can handle it yourself. Here's a comprehensive, step-by-step guide to help you remove your Baldwin front door handle.

Before we dive into the process, it's essential to gather all the necessary tools. You'll need a screwdriver or an Allen wrench (depending on the type of screw used), a flathead screwdriver, and possibly a drill if the screws are too stripped or damaged. Also, ensure you have a new handle ready for installation to avoid any unnecessary delays.

Preparation and Initial Assessment

First, assess the current state of your Baldwin front door handle. If the handle is severely damaged or the screws are stripped, you might need to drill them out. If that's the case, be prepared for a bit more work and ensure you have the right drill bit to match the size of the screws.

AD
a close up of a door handle on a wooden door
a close up of a door handle on a wooden door
Fix Loose Front Door Handles in Minutes: DIY Guide
Fix Loose Front Door Handles in Minutes: DIY Guide
Easy Steps to Tighten Your Front Door Handle
Easy Steps to Tighten Your Front Door Handle

Next, prepare the area by closing any nearby pet doors or securing any pets or children who might wander in. The last thing you want is an interruption halfway through the process. Also, have a small container ready to hold the removed screws and any other small parts to prevent them from getting lost.

Removing the Doorknob and Rosette

The first step is to remove the doorknob and rosette (the decorative part that covers the mounting screws). Using your screwdriver or Allen wrench, turn the set screw counterclockwise to remove it. This screw secures the doorknob in place. Typically, it's located on the underside of the doorknob, but it can sometimes be on the inside of the rosette. If you're having trouble finding it, use your flashlight to help locate it.

How To Replace a Door Knob for Handle Set
How To Replace a Door Knob for Handle Set
a person using a drill to open a door
a person using a drill to open a door

Once the set screw is removed, gently pull the doorknob outwards to disengage it from the latch. You might need to wiggle it a bit to get it to pop out. Then, use your flathead screwdriver to pry off the rosette by inserting it between the rosette and the door. The rosette should come right off, revealing the mounting screws.

Removing the Mounting Screws

Now that you have access to the mounting screws, use your screwdriver or drill (if necessary) to remove them. Be careful not to strip the remaining screws if you haven't already. If you're drilling out the screws, ensure you have the right drill bit size to prevent damaging the door.

AD

With the mounting screws removed, gently pull the Baldwin front door handle out. It should come out easily, revealing the latch and strike plate. If it's stuck, use your flathead screwdriver to gently pry it off. If it's still not budging, you might have to remove the strike plate and the latch to get it out. Don't worry; you can replace them later.

Removing the Latch and Strike Plate

If you need to remove the latch and strike plate, you'll first need to unscrew the setscrews that hold them in place. These are usually located on the edge of the door or on the faceplate. Once the setscrews are removed, the latch and strike plate should pop out easily.

If the latch or strike plate is stuck, use your flathead screwdriver to gently pry it off. Be careful not to damage the door or the surrounding trim. Once both pieces are removed, you should now have a completely clear door ready for your new handle.

AD

Preparing the Door for the New Handle

Before installing the new handle, ensure the door is clean and dry. If there are any remnants of the old hardware, use a mild soap and water solution to clean it off. Also, check the size of the hole in the door to ensure it matches the size of the new hardware. If it doesn't, you might need to enlarge the hole slightly using a drill or a chisel.

Finally, once you've ensured everything is clean and ready, it's time to install your new Baldwin front door handle.Reverse the process you used to remove the old handle, but this time, make sure to secure the new handle tightly to ensure it's sturdy and secure.

And there you have it! By following these steps, you've successfully removed your old Baldwin front door handle and prepared your door for a new one. Remember, the key to any successful DIY project is patience and careful attention to detail. Now, go ahead and upgrade your home with that beautiful new handle you've been eyeing.

AD
AD