how to remove an american standard shower handle

DIY: Remove American Standard Shower Handle Step-by-Step

By Nicole Young
AD

Are you tired of your shower handle not working properly or looking dated? Maybe it's time to replace it with a new, modern American Standard shower handle. But before you can install a new one, you'll need to know how to remove the old one. Don't worry, it's a simple process that anyone can do with the right knowledge and tools. Let's dive into the step-by-step guide on how to remove an American Standard shower handle.

Before we start, make sure you have the following tools ready: a flathead screwdriver, a Phillip's head screwdriver, an adjustable wrench, and some pliers. Also, gather some towels or a bucket to catch any leaked water. Now, let's get started.

Preparation and removal of the Escutcheon

Start by turning off the main water supply to your shower. This is usually located on the wall below your shower or in your home's main water shutoff panel. Once the water is off, open your shower to let any remaining water drain out.

AD
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Shower Handle Sans Screws: DIY Guide
How to Remove Shower Handle Sans Screws: DIY Guide
American Standard T675.500 trim & R121SS Shower valve
American Standard T675.500 trim & R121SS Shower valve

The escutcheon is the metal plate that your shower handle is attached to. You'll need to remove this first. Most American Standard escutcheons are secured with screws, but some may use set screws. Use your Phillip's head screwdriver to unscrew the set screws or your flathead screwdriver to remove the screws.

Removing the setscrew

If your shower handle has a setscrew, use a small flathead screwdriver to loosen and remove it. The setscrew might be under the escutcheon or on the handle itself. If you're unsure where the setscrew is located, consult the American Standard product manual or look up your specific model online.

How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Change Shower Handle: Easy DIY Guide | CRANACH
How to Change Shower Handle: Easy DIY Guide | CRANACH

After removing the setscrew, gently pull the shower handle towards you to disengage the prism that slots into the valve body. If the handle is stuck, try rotating it gently while pulling. You can use some penetrating oil like WD-40 to help loosen any corrosion.

Removing the handle

Now that the setscrew is out and the prism is disengaged, the handle should come off easily. Gently pull it out and away from the wall. If it's still stuck, try using some gentle persuasion with a soft mallet, protecting the handle with some cloth or tape.

AD

Once the handle is off, you should see the valve stem and the packing nut (the large nut at the base of the valve stem). You'll need to remove these to prepare for the new shower handle.

Removing the Packing Nut and Valve Stem

Use your adjustable wrench to turn the packing nut counterclockwise. It might be tight, so use some force, but be careful not to strip the nut. If the nut won't budge, you can wrap some tape around the wrench's jaw to give you a better grip. Once the nut is off, use the wrench to grip the valve stem and turn it counterclockwise until it comes out from the wall.

With the valve stem removed, you should now see the seat washer and the seat itself. These are the parts that control the water flow to your shower. If these parts are worn or damaged, you may need to replace them before installing your new shower handle.

AD

Removing the Seat and Seat Washer

Use your pliers to gently pull out the seat washer. It might be stuck, so use some force, but be careful not to bend or damage it. The seat itself is usually extracted by turning it counterclockwise with your pliers. If it's too tight, you can use your adjustable wrench, but be gentle to avoid damaging the seat.

The final components that need to be removed are the brass insert and the rubber insert (also known as the 'O' ring). These might just pop out with a little pressure, or you might need to use some pliers to gently pull them out.

Congratulations, you've successfully removed your American Standard shower handle and all its components! Now you're ready to install your new handle. Always remember to inspect all the components before installing a new handle to ensure everything is in good working order.

AD

When you're ready to reinstall your shower, make sure to follow the reverse order of this guide. And if you encounter any issues, don't hesitate to consult the product manual or contact American Standard's customer service. Now go ahead and upgrade your shower with a fresh, new handle!

AD