how to remove american standard shower handle

How to Remove American Standard Shower Handle

By Joseph Hernandez
AD

If you're dealing with a leaky or faulty American Standard shower handle, it's important to address the issue promptly to prevent further damage and water wastage. Removing an American Standard shower handle might seem daunting, but with the right tools and a systematic approach, you can tackle this task like a pro. Here's a comprehensive guide on how to remove an American Standard shower handle.

Before you begin, gather your tools. You'll need an adjustable wrench, a flathead screwdriver, a shower valve removal tool, and sometimes, a rubber mallet. Also, lay down a towel or a cloth to catch any dropped screws or parts. Now, let's dive into the step-by-step process.

Preparation and Initial Steps

Before you start dismantling, ensure the water supply to your shower is turned off. Locate the main water valve and turn it clockwise until it stops. This is a crucial step to prevent water from gushing out while you're working on the shower handle.

AD
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Shower Handle Sans Screws: DIY Guide
How to Remove Shower Handle Sans Screws: DIY Guide
American Standard T675.500 trim & R121SS Shower valve
American Standard T675.500 trim & R121SS Shower valve

Next, turn on the shower faucet to relieve any remaining water pressure. This step is vital as it helps prevent unexpected water flow when you remove the shower handle.

Accessing the Shower Handle Screws

The first step in removing the American Standard shower handle is to access the screws that hold it in place. These screws are typically hidden behind a decorative plate or a cover. To reveal them, you might need to remove the shower handle's escutcheon, which is the decorative trim around the handle.

How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Change Shower Handle: Easy DIY Guide | CRANACH
How to Change Shower Handle: Easy DIY Guide | CRANACH

American Standard handles usually have two screws, one at the top and one at the bottom, securing the handle to the shower valve. To access these screws, you might need to use a flathead screwdriver or a utility knife to carefully pry off the escutcheon. If your shower handle has a cap or a cover, you might need to use a rubber mallet to gently tap it off.

Removing the Shower Handle Screws

Once you've accessed the screws, use an adjustable wrench to grip the screw head firmly. Turn the wrench counterclockwise to unscrew the first screw. It might be tight, so be patient and use steady pressure.

AD

After removing the first screw, move on to the second. If the screw is stuck, you can try applying some penetrating oil like WD-40 to loosen it. If the screw is too stripped to turn with a wrench, you might need to use a shower valve removal tool designed for stubborn or broken screws.

Disconnecting the Shower Handle

With both screws removed, the shower handle should be loose but still connected to the shower valve via a linkage. This linkage is usually a rod or a roll pin that allows the handle to control the water flow.

To disconnect the handle, you'll need to push the linkage back into the shower valve body. This might require some force, so be prepared. You can use a rubber mallet to gently tap the handle or the shower valve body to help slide the linkage back into place.

AD

Removing the Shower Handle

Once the linkage is disconnected, the shower handle should be free to move. Carefully pull the handle away from the shower wall to remove it. The handle might be stuck due to dirt, mineral deposits, or old soap scum. If it's too tight, you can use a lubricant like WD-40 to help loosen it.

If the handle still won't budge, you might need to take your shower to a professional plumber. Some high-quality shower handles might be designed to be non-removable for security reasons or to prevent tampering.

Cleaning and Preparation for Replacement

With the shower handle removed, it's a good time to clean the area around the shower valve to prevent future leaks or water damage. Use a cloth soaked in white vinegar or a shower cleaner to scrub away any dirt, soap scum, or mineral deposits.

AD

Once the area is clean and dry, you're ready to install the new shower handle. Installation is essentially the reverse of removal. Make sure to align the new handle with the shower valve linkage and secure it tightly with the screws.

Congratulations, you've successfully removed your American Standard shower handle! Now that you've seen how simple it is, you're ready to tackle any other shower maintenance tasks that come your way. Always remember to turn off the water supply before working on your shower to prevent any unwanted water mishaps. Happy DIYing!

AD