how to remove agitator maytag washer

“Fix Your Maytag: How to Remove Agitator Step-by-Step”

By Steven Johnson
AD

Is your Maytag washer giving you trouble? One common issue is a faulty agitator. The agitator is the dominant part of your washing machine's workings, responsible for agitating the water to clean your clothes. Removing it can be tricky, but this guide will help you navigate the process step-by-step.

Before we delve into the process, ensure you have the following tools: a Phillips-head screwdriver, a putty knife, a towel, and some courage. Remember, safety first. Disconnect the washer from the power supply before starting. Now, let's dive into how to remove the agitator from your Maytag washer.

Accessing the Agitator

The first hurdle is gaining access to the agitator. follow these steps:

AD
Where is the filter on your Maytag washer top loader (no agitator model)?
Where is the filter on your Maytag washer top loader (no agitator model)?
How to remove agitator from Maytag washer mvwc565fw1?
How to remove agitator from Maytag washer mvwc565fw1?
How to Remove the Agitator From a Washing Machine Repair Washer Agitator, How To Clean Agitator In Washer, How To Replace Agitator On Whirlpool Washer, How To Replace Washing Machine Agitator, How To Repair Maytag Washing Machines, How To Fix Maytag Washing Machine, How To Clean Washing Machine Agitator, Ge Washer Agitator Replacement Instructions, How To Replace Washing Machine Stator
How to Remove the Agitator From a Washing Machine Repair Washer Agitator, How To Clean Agitator In Washer, How To Replace Agitator On Whirlpool Washer, How To Replace Washing Machine Agitator, How To Repair Maytag Washing Machines, How To Fix Maytag Washing Machine, How To Clean Washing Machine Agitator, Ge Washer Agitator Replacement Instructions, How To Replace Washing Machine Stator

1. Clear the area around the washer. You want sufficient space to work comfortably.

2. Remove the screws from the back of the washer. On most models, you'll find these at the top. Unscrew and remove them.

How to Reset Maytag Washer - Ready To DIY
How to Reset Maytag Washer - Ready To DIY
Removing a washing machine wash plate the easy way. DIY that anyone can do. Maytag Bravos Agitator
Removing a washing machine wash plate the easy way. DIY that anyone can do. Maytag Bravos Agitator

Removing the Top Panel

Once the screws are out, you can lift off the top panel. Lift from the back and gently work your way forward.

3. Place the panel face down on a towel to prevent scratches. Now you can see the control panel, which is held in place by more Phillips screws.

AD

Disconnecting the Control Panel

Our next step is to disconnect the control panel. Follow these steps:

4. Remove the screws holding the control panel in place. There might be a few hidden under plastic caps, so keep an eye out for those.

5. Once the screws are removed, gently lift the control panel. It's attached to the washer by a wire harness, so be careful not to tug too hard.

AD

Removing the Agitator

Now that you've accessed the agitator, it's time to remove it. Here's how:

6. Look for the agitator center post. You might need to remove some plastic covers to access it. Underneath the post, you'll find a circular plastic piece with a slot in it. This is the retainer that holds the agitator in place.

Removing the Retainer

To remove the retainer, use the putty knife to pry it off the post. You might need to use some force, but be careful not to bend or break it.

AD

7. Once the retainer is off, the agitator should lift out easily. If it's stuck, you might need to use some gentle persuasion with a rubber mallet.

Cleaning the Agitator

Now that you've removed the agitator, it's a good opportunity to clean it. Here's how:

8. Scrape off any mold or mildew with a brush or a old toothbrush. If there's a stubborn build-up, use a solution of bleach and water to help break it down.

9. Once it's clean, leave it to dry completely. Make sure it's thoroughly dry before re-installing it to prevent mold growth.

Remember, if you're unsure about any step or feel overwhelmed, it's better to call a professional. DIY repairs can save you money, but safety should always be your top priority. With the agitator removed and cleaned, your Maytag washer should be working like new. Happy washing!

AD