how to remove a water softener system

How to Safely Remove and Disconnect Your Water Softener System

By Steven Williams
AD

Are you looking to remove a water softener system from your home? While water softeners can help to reduce hardness in your water, there may come a time when you need to uninstall it. Perhaps you're moving and the new home already has a softener, or maybe you want to save on maintenance and energy costs. Whatever your reason, we've created this comprehensive guide to help you safely and effectively remove your water softener system.

It's important to remember that removing a water softener system should only be done by someone with at least basic plumbing knowledge. If you're uncertain about any part of the process, it's always best to call in a professional. Now, let's dive into the steps involved in removing a water softener system.

Preparation and Safety Measures

Before starting, make sure to turn off the power to your water softener. You can do this at the circuit breaker or by unplugging the unit if it's corded. Next, locate the shut-off valves for your water supply and drain the system. This will prevent any unnecessary flooding or water damage while you're working.

AD
How to Install a Water Softener DIY (Step-by-Step Guide)
How to Install a Water Softener DIY (Step-by-Step Guide)
A Step by Step Guide to Water Softener Repair
A Step by Step Guide to Water Softener Repair
How To Remove “Hardness” from Your Water with a Home Water Softener
How To Remove “Hardness” from Your Water with a Home Water Softener

Safety is paramount when working with plumbing. After shutting off the water and draining the system, make sure to put on some gloves to protect your hands. You may also want to have a funnel and a bucket on hand to catch any drips or leaks.

Draining and Disconnecting the Resin Tank

Water softeners usually have a resin tank that needs to be drained and disconnected. To do this, you'll first need to disconnect the water supply and brine lines. Use a crescent wrench to carefully loosen and remove the union nuts that connect these lines to the tank. Once disconnected, you can cap these lines to prevent any backflow.

Install Your Own Water Softener
Install Your Own Water Softener
Water Softener Reset And Maintenance: A Simple Guide
Water Softener Reset And Maintenance: A Simple Guide

After disconnecting the lines, you'll need to drain the resin tank. This can often be done by opening a valve at the bottom of the tank, but the process may vary depending on your specific model. Consult your user manual or look for the specific maker's recommendations. After draining, you can disconnect the tank by unscrewing the bolts that hold it in place and carefully lifting it out.

Disconnecting the Control Valve

The control valve is the brain of the water softener system, responsible for regulating the water flow and the regeneration process. To disconnect it, you'll first need to remove the cover plate. This is usually held in place by screws or a clip that can be pried off with a flathead screwdriver.

AD

Once the cover is removed, you'll see the control valve itself. It's typically connected to the resin tank and the water supply lines with plastic or copper tubes. You'll need to disconnect these, again using a crescent wrench. After disconnecting the tubes, you can unscrew the mounting screws and remove the control valve.

Removing the System and Final Cleanup

With the resin tank and control valve removed, you're nearly done. You'll now need to remove the remaining plumbing. This usually involves disconnecting the hard plumbed-in lines from your home's plumbing system. This can be a complex task, especially if the lines are copper and sweat-connected. If you're not comfortable doing this yourself, it may be best to call in a professional.

After removing the system, make sure to thoroughly clean the area. You may want to use a degreaser to remove any residue left behind by the water softener. Once the area is clean, you can reinstall the normal water line, restoring your home's plumbing to its pre-softener state.

AD

Reinstalling the Normal Water Line

With the water softener system removed, you'll need to reinstall the normal water line. This is usually a straightforward process of connecting the line to your home's main water supply and running it to the appropriate outlets. Make sure to test the line for any leaks after reinstalling.

Once you've finished reinstalling the normal water line, you can turn the water back on at the main shut-off valve. Before using any of your home's water, make sure to flush the lines to remove any air that may have gotten in during the process.

As a final note, what you do with your old water softener system is up to you. If you're not keeping it, consider donating it or selling it to someone who could use it. On the other hand, you might also consider repurposing it, as water softeners have a surprising range of alternative uses.

AD

And there you have it - a comprehensive guide to safely removing a water softener system from your home. From preparation and safety measures to the final cleanup and reinstallation of the normal water line, we've covered everything you need to know. Now that you've successfully removed your water softener, you can move on to your next home improvement project with confidence. Happy renovating!

AD