how to remove a stripped bolt from caliper

How to Remove a Stripped Bolt from a Caliper

By Daniel Young
AD

Have you ever found yourself in a situation where you're tightening a bolt, only for it to suddenly strip, leaving you with a rounded-off bolt that's impossible to unscrew? This common predicament can seem daunting, especially when it happens to a critical component like your vehicle's caliper. But fear not, as today we're going to tackle this headache-inducing issue and explore several effective methods on how to remove a stripped bolt from a caliper.

Before we dive into the solutions, let's first understand the problem.Bolts can strip due to various reasons. Over-tightening, using the wrong tool, or the bolt's compromised quality can all lead to stripping. Whatever the cause, leaving a stripped bolt in place can lead to further damage and costly repairs. So, let's get down to business and learn how to remove a stripped bolt from your caliper.

Using a Specialty Tool - Extraction Screw Kit

One of the most effective ways to remove a stripped bolt is by using an extraction screw kit. These kits are specifically designed to deal with such situations and can be found at most hardware stores or online retailers.

AD
How to Remove a Stripped Bolt (10 Simple Methods)
How to Remove a Stripped Bolt (10 Simple Methods)
How To Remove Broken Snapped Brake Caliper Bolt
How To Remove Broken Snapped Brake Caliper Bolt
How to Remove a Stripped Bolt or Nut in Your Car
How to Remove a Stripped Bolt or Nut in Your Car

The process involves drilling a small hole into the center of the stripped bolt, then screwing in an extraction screw. As you turn the screw, it grips the bolt's remnant threading, allowing you to unscrew the bolt. It's a neat little trick that can save you a lot of time and headache.

Choosing the Right Kit

When selecting an extraction screw kit, make sure it matches the size of your stripped bolt. The kit should come with a variety of extractor screws to accommodate different bolt sizes.

HOW TO REMOVE STRIPPED TORX BOLT OR ANY BOLT IN 5 MINS
HOW TO REMOVE STRIPPED TORX BOLT OR ANY BOLT IN 5 MINS
What Is the Red-Colored Auto Part Seen Inside the Tires of Certain Cars?
What Is the Red-Colored Auto Part Seen Inside the Tires of Certain Cars?

Additionally, ensure the kit includes a drill bit that's slightly smaller than the extractor screws. This bit will help you create a clean, precise hole in the center of the stripped bolt, making the extraction process smoother.

Drilling and Extracting

Using your drill, carefully create a small pilot hole in the center of the stripped bolt. Be cautious not to drill too deep or you might damage the underlying surface.

AD

After drilling, select an extraction screw that matches the bolt's threading and slowly screw it into the pilot hole. As you tighten, the screw's threading should bite into the remaining threads of the bolt, providing a grip.

Utilizing Epoxy and a Hacksaw

If an extraction screw kit isn't available, or if you prefer a more DIY approach, you can use epoxy and a hacksaw to remove the stripped bolt. This method requires more patience but can be just as effective.

The process involves applying epoxy to the stripped bolt, letting it harden, and then carefully sawing through the bolt's head. Once sawed through, the remaining bolt can be easily removed using a wrench or pliers.

AD

Applying the Epoxy

Using a putty knife or a similar tool, apply a generous amount of epoxy to the stripped bolt. Ensure the epoxy completely covers the bolt's head and seeps into any visible cracks. The more epoxy you use, the better the bond between the bolt and the epoxy will be.

Allow the epoxy to cure for the time specified on the packaging. This usually takes several hours, so be patient and avoid disturbing the area during this time.

Sawing Through the Bolt

Once the epoxy has fully cured and hardened, you can begin sawing through the bolt. Using a hacksaw with a fine-tooth blade, carefully cut through the bolt's head.

AD

Work slowly and steadily, applying even pressure as you saw. If you rush or apply too much pressure, you might damage the surrounding area or create a jagged edge that's difficult to remove.

Using a Bolt Extractor Tool

Another useful tool to remove a stripped bolt is a bolt extractor, also known as an impact wrench. This powerful tool uses high-impact forces to loosen and remove bolts that would otherwise be impossible to unscrew.

Bolt extractors work by creating a new grip on the bolt's remaining threading. They can be used on a variety of bolt sizes, making them a versatile solution for removing stripped bolts.

Choosing the Right Extractor

When selecting a bolt extractor, consider the size and type of your stripped bolt. Ensure the extractor's jaws can fit securely around the bolt's remaining threading.

Additionally, consider the extractor's impact rating. A higher impact rating means the tool can apply more force, which may be necessary for deeply stripped bolts.

Extracting the Bolt

Once you've selected the appropriate extractor, secure it around the stripped bolt. Ensure the jaws fit snugly against the bolt's remaining threading.

Activating the extractor, apply steady pressure as you attempt to unscrew the bolt. If the bolt doesn't budge, try applying more pressure, or even using an impact wrench to give it an extra push.

With the bolt finally removed, you can breathe a sigh of relief. Remember to replace the bolt with a new one, ensuring it's of suitable quality and length. And next time you're tightening a bolt, take it easy - a little care goes a long way in preventing stripped bolts.

AD