how to remove a metal toilet flange

How to Remove a Metal Toilet Flange

By Robert Miller
AD

When it comes to toilet maintenance, one issue that often crops up is the deterioration of the toilet flange. This part connects your toilet to the drain pipe and over time, it can become worn out, leading to leaks and other problems. If your metal toilet flange is damaged or beyond repair, you might consider removing it yourself. This guide will walk you through the process, providing tips and tricks to help you achieve a successful removal. Remember, always prioritize safety during these procedures.

Before we delve into the removal process, let's briefly discuss the variety of toilet flanges available. There are metal flanges, which are typically made from brass or cast iron, and PVC flanges. This guide focuses on removing metal toilet flanges, which often come with a locknut that secures the flange to the floor.

Preparation: Gather Your Tools and Understand the Space

No job can commence without the right tools. For this task, you'll need a screwdriver that matches the type used for your locknut (usually either Phillips or flathead), a large adjustable wrench, a putty knife, and perhaps a reciprocating saw if the bolts are stuck or damaged. If your toilet is attached to the floor with bolts, you'll also need a adjustable wrench to loosen and remove them.

AD
How to Remove Glued Toilet Flange
How to Remove Glued Toilet Flange
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
How to Replace Flange on Toilet
How to Replace Flange on Toilet

Next, assess the space around your toilet. If the area is cramped or cluttered, you might need to remove some obstructions to work comfortably. Also, ensure you have a clear path to your nearest water supply valve, as you'll need to turn off the water before removing the toilet.

Step 1: Turn Off the Water Supply and Prepare the Toilet

To avoid unnecessary water damage, start by turning off the water supply to your toilet. Locate the water supply valve (usually at the wall behind the toilet) and turn the handle clockwise until it stops. Once the water is off, flush the toilet to empty the tank. Next, disconnect the water supply line from the toilet. Now, your toilet is disconnected from the water supply.

an old toilet bowl with rust on the bottom and black piping in it's center
an old toilet bowl with rust on the bottom and black piping in it's center
How to Remove an Existing Toilet Flange Installed on Plywood: Step-by-Step Process
How to Remove an Existing Toilet Flange Installed on Plywood: Step-by-Step Process

Tip: Before you start working, put on some old clothes and wear gloves to protect your hands. If you're planning to reuse your old bolts, mark them with a marker or tie a string around them to ensure they're reinstalled on the correct side of the toilet.

Step 2: Remove the Toilet

If your toilet is secured to the floor with bolts, you'll need to remove these before detaching the toilet. Carefully wedge a putty knife between the toilet base and the floor, then gently tap it with a hammer to break the wax seal. Next, use the adjustable wrench to grip the bolts and turn them counterclockwise until they're loose. If the bolts are stuck, you can use a reciprocating saw to cut them off.

AD

With the bolts removed, carefully lift the toilet off the flange. If it's too heavy, don't hesitate to ask for help;injuries are more likely when attempting to lift heavy objects alone. Place the toilet upside down in a nearby stall or on an old blanket to prevent damage to the porcelain.

Removing the Metal Toilet Flange

Now that the toilet is removed, you can proceed with disconnecting the flange. If there's a locknut securing the flange to the floor, start by attempting to loosen it with the adjustable wrench. If it's stuck, you might need to use a reciprocating saw to cut the locknut off.

Once the locknut is removed, you can start working on the bolts securing the flange to the toilet. As mentioned earlier, use the appropriate screwdriver to loosen the bolts. If they're stuck, apply some WD-40 or another lubricant to help them turn more easily. Keep turning the bolts counterclockwise until they're completely removed.

AD

Removing the Flange Itself

With the bolts removed, the flange should now be loose enough to pull out. Grasp the flange and pull upward to remove it from the drain pipe. If it's stubborn, you might need to use a reciprocating saw to cut it in half before removal. Once the flange is out, you can discard it.

Note: If your drain pipe is made of PVC, you might want to inspect it for leaks or deterioration. If you find any damage, it's best to replace the entire drain pipe before installing a new flange.

Preparing the Area for the New Flange

Before installing a new flange, ensure the area is clean and free of any debris. You might need to use a shop vacuum or a brush to remove any dust or dirt from the floor. Additionally, you can add a new layer of sealant to the floor to create a better base for the new flange.

AD

Once the area is clean, you're ready to install your new metal toilet flange. Follow the above steps in reverse order, ensuring you tighten the bolts and locknut carefully to create a secure seal. After installing the new flange, you can reattach your toilet and turn the water supply back on.

And there you have it! You've successfully removed your old metal toilet flange and replaced it with a new one. Remember, if you're unsure about any part of the process or if the job seems too complex, don't hesitate to call a professional plumber. Regular maintenance and prompt attention to leaks and other problems can help ensure your toilet remains functional and durable for years to come.

AD