how to remove a kohler shower faucet

Step-by-Step: Removing a Kohler Shower Faucet

By Kevin Miller
AD

Experiencing shower trouble due to a faulty Kohler faucet? Don't let a leaky or stiff shower faucet dampen your day. With the right tools and a bit of patience, you can replace it yourself. Here's a comprehensive guide on how to remove a Kohler shower faucet and have yours running smoothly again.

Before you begin, ensure you have all the necessary tools and that the water supply to your shower is turned off at the main valve. This will prevent any unwanted water damage and ensure your safety during the process.

Preparing for the Faucet Removal

Your first step should focus on preparing your workspace. This means ensuring the shower area is clear of any obstructions and that your tools are readily available.

AD
DIY Guide- Replace Your Shower Faucet
DIY Guide- Replace Your Shower Faucet
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove a Kohler Bathroom Faucet
How to Remove a Kohler Bathroom Faucet

Next, locate the access panel for your shower's plumbing. This is usually found behind the showerhead or in the shower wall. Remove the panel to expose the shower faucet's escutcheon and mechanism.

Gathering Your Tools

You'll need a specific tool for this job, so ensure you have the following in your toolkit:

Screwless Shower Handle Removal: Step-by-Step Tips
Screwless Shower Handle Removal: Step-by-Step Tips
What To Do When Replacing a Shower Valve Gets Complicated
What To Do When Replacing a Shower Valve Gets Complicated
  • A flathead screwdriver
  • A Phillips screwdriver
  • Channel-type pliers
  • Slip joint pliers
  • An adjustable wrench
  • Rubber gloves

Turning Off the Water Supply

Before you start, it's crucial to turn off the water supply to your shower. Locate the shutoff valve near your shower, and turn it clockwise to close it. If your shower doesn't have a shutoff valve, you'll need to turn off the main water supply to your home.

After turning off the water, open the shower faucet to release any residual water pressure in the lines.

AD

Removing the Faucet Handle

Now that your workspace is ready, it's time to start dismantling your shower faucet. Begin by removing the faucet handle and escutcheon.

Use your flathead screwdriver to pry off the escutcheon, a decorative cover that conceals the faucet's mechanism. Then, use your Phillips screwdriver to remove the set screw that secures the faucet handle in place. Once the screw is out, gently pull the handle off.

Removing the Faucet Cartridge Assembly

The faucet cartridge assembly is the core of your shower faucet. It's what controls the water flow. To remove it, first, unscrew the nuts or bolts that secure it to the faucet body using your channel-type pliers.

AD

Once the cartridge assembly is loose, grasp it with your hands or use slip joint pliers to pull it out. Sometimes, the assembly might be stuck due to mineral buildup. If so, you might need to use some force or apply lube to free it.

Disconnecting the Water Supply Lines

With the cartridge assembly out, you'll now need to disconnect the water supply lines. Use your adjustable wrench to loosen and remove the nuts that secure these lines to the faucet body.

After removing the nuts, carefully pull the supply lines away from the faucet body. Be cautious not to bend or damage the supply lines, as this could cause leaks later.

AD

Inspecting and Preparing for the New Faucet

Before you install your new faucet, it's wise to inspect the area around the hole in the faucet body where the faucet cartridge once resided.

If you find any damage or signs of wear, now is the time to address them. You might need to replace certain parts or apply plumber's putty before installing the new faucet.

Ordering a Replacement Faucet

When ordering a replacement faucet, ensure you get the correct one for your shower. Kohler offers a variety of faucet designs and mechanisms, so it's essential to match your current faucet's specifications as closely as possible.

If you're unsure, consult with a professional plumber or obtain detailed measurements from your existing faucet.

Installing the New Faucet

Once you have your new faucet, the process of installation is essentially the reverse of the removal process. Start by wrapping the faucet body with plumber's putty to create a watertight seal.

Then, insert the new faucet cartridge assembly and secure it using the provided screws or nuts. Reattach the water supply lines, escutcheon, and faucet handle. Finally, turn the water supply back on and test your new faucet.

There you have it! Your new Kohler shower faucet is now ready to provide you with years of hassle-free service. Regular maintenance and occasional checks will help ensure its longevity. If you encounter any issues during the process, don't hesitate to consult a professional plumber.

AD