how to remove aerator from moen pull down faucet

Step-by-Step: Removing an Aerator from a Moen Pull-Down Faucet

By Ashley Jackson
AD

Nothing ruins the aesthetic of your kitchen or bathroom sink like a grimy, clogged aerator on your Moen pull-down faucet. But don't let this minor inconvenience get you down. Removing and cleaning an aerator is a simple task that requires just a few tools and a bit of elbow grease. Let's guide you through the process with this step-by-step guide on how to remove and clean the aerator from your Moen pull-down faucet.

Before we dive into the nitty-gritty, it's crucial to understand that the type of Moen faucet you have may slightly alter the process. For this guide, we'll focus on the most common Moen pull-down faucets, but if you're unsure, don't hesitate to look up your specific model or consult Moen's customer service.

Gather Your Tools and Prepare Your Workspace

.Before you start, gather all the tools you'll need to make the process smoother.

AD
How To Remove A Kitchen Faucet
How To Remove A Kitchen Faucet
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
the words how to remove hidden aerators in delta faucets / hunker
the words how to remove hidden aerators in delta faucets / hunker

Here's a list of tools you'll likely need:

  • Allen wrench (usually provided with the faucet)
  • Adjustable wrench
  • needle-nose pliers
  • White vinegar or CLR (Calcium, Lime, and Rust remover)
  • Toothbrush or toothpick
  • Paper clips or safety pins (optional, for stubborn debris)

Once you've gathered your tools, protect your workspace from water spills and potential dripping by laying down a towel or placing a bowl underneath the faucet.

Help and FAQ | KOHLER
Help and FAQ | KOHLER
How To Remove A Faucet Aerator That Is Stuck
How To Remove A Faucet Aerator That Is Stuck

Preventing Water Splashes While Working

Before you begin disassembling the faucet, turn the handle to the "on" position to allow all the water to drain out. This will reduce the risk of water splashing or dripping while you work.

Isolation Valve: Turn Off the Water Supply

Even though you've drained the faucet, it's still a good idea to turn off the water supply to your sink. Locate the isolation valve under the sink and turn it clockwise to shut off the water. If you're unsure, consult your sink's user manual or a professional plumber.

AD

Removing the Aerator: Step-by-Step

Now that your workspace is prepared and the water supply is turned off, you're ready to remove the aerator. Follow these steps carefully:

Identify and Remove the Aerator Cap

The aerator cap is the decorative piece that screws onto the faucet's spout. Grab your adjustable wrench, place it over the cap, and turn it counterclockwise to unscrew it. If the cap doesn't budge, wrap some masking tape around the wrench's jaws to better grip the cap without damaging it. If the cap is made of plastic, you can carefully use needle-nose pliers instead of a wrench.

Removing the Aerator Screen

Once the cap is off, you'll see the aerator screen, a small mesh-like piece that sits immediately below the cap. To remove it, carefully unscrew it using an Allen wrench (usually a size #50 or #60). If you don't have an Allen wrench, you can try using a plain screwdriver, but be careful not to damage the aerator.

AD

If the screen is rusted or stubborn, you can soak it in white vinegar or CLR to help break down the mineral and rust buildup before trying to unscrew it. Let it soak for around 15-30 minutes, then use a toothbrush or toothpick to gently scrub the buildup away.

Cleaning the Aerator Screen

Now that the aerator screen is removed, it's time to clean it. Soak it in white vinegar or CLR to help dissolve any mineral deposits or rust. For particularly stubborn buildup, you can use a toothbrush or toothpick to gently scrub the screen.

Once the screen is clean, give it a thorough rinse and set it aside to dry.

AD

Inspecting and Cleaning the Faucet's Nozzle

Use this opportunity to inspect and clean the faucet's nozzle. Over time, debris and mineral deposits can build up in the nozzle, causing poor water flow or creating odd water patterns. Use a toothbrush or a straightened paper clip to gently remove any buildup from the nozzle.

Reassembling Your Moen Faucet Aerator

With the aerator screen thoroughly cleaned and dried, it's time to reassemble your Moen pull-down faucet. Start by reinserting the aerator screen and secure it with the Allen wrench, turning it clockwise until snug. Don't overtighten it, as this may cause damage or make it difficult to remove in the future.

Replacing the Aerator Cap

Next, place the aerator cap over the aerator screen and gently screw it clockwise until snug. Again, be careful not to overtighten it.

If you're using an adjustable wrench, use the masking tape trick to protect the cap from damage. If you're using needle-nose pliers, take extra care to avoid cracking or breaking the cap.

Turning the Water Supply Back On

With the aerator reassembled, turn the isolation valve under your sink counterclockwise to restore the water supply. Test your faucet by turning the handle to the "on" position. If water flows smoothly and evenly, you've successfully removed, cleaned, and reassembled your Moen pull-down faucet's aerator.

Regularly cleaning your faucet's aerator will not only improve water flow and pressure but also extend the lifespan of your faucet. Happy maintenance!

AD