how to remove a bathroom faucet

Mastering DIY: How to Remove a Bathroom Faucet in 5 Easy Steps

By Daniel White
AD

Is your bathroom faucet dripping or worse, broken? You don't have to live with it, nor do you need to call a plumber. Removing a bathroom faucet for repair or replacement is a DIY project that's surprisingly straightforward. Let's guide you through the process, step by step.

Before you begin, gather your tools. You'll need an adjustable wrench, a screwdriver, some penetrating oil like WD-40, a set of flathead and Phillips screwdrivers, and a basin wrench for tight spaces. Don't forget to have a bucket on hand to catch any water. Now, let's get started.

Preparing the Workspace

First, turn off the water supply to your faucet. Look under the sink and you should see two pipes connected to the faucet: one is hot water and the other is cold. Turn the valves clockwise to stop the water flow. If you're unsure, use a marker to label each pipe before turning them off.

AD
How To Replace Bathroom Faucet Aerator, How To Change Faucet Fixtures, Change Faucet Bathroom, How To Change A Faucet Bathroom, How To Change Bathroom Tub Faucet, Change Bathroom Faucet, Replace Faucet Bathroom, Replacing Bathroom Faucet, How To Change Bathroom Faucet
How To Replace Bathroom Faucet Aerator, How To Change Faucet Fixtures, Change Faucet Bathroom, How To Change A Faucet Bathroom, How To Change Bathroom Tub Faucet, Change Bathroom Faucet, Replace Faucet Bathroom, Replacing Bathroom Faucet, How To Change Bathroom Faucet
How To Change A Bathroom Faucet | Young House Love
How To Change A Bathroom Faucet | Young House Love
How To Remove Moen Bathroom Faucet Handle 2 Easy Methods
How To Remove Moen Bathroom Faucet Handle 2 Easy Methods

Next, plug your sink drain with a rag to prevent small parts from falling in. If water is trapped in the faucet, turn on the hot and cold faucet handles to drain it. Now, your workspace is ready.

Removing the Faucet Handle

Start by removing the faucet handle. For lever handles, pop off the cap at the base of the handle using a flathead screwdriver. This reveals a setscrew that holds the handle onto the stem. Loosen this screw with an adjustable wrench and pull off the handle.

How to Remove a Stripped Screw from a Bathtub Faucet
How to Remove a Stripped Screw from a Bathtub Faucet

For knob handles, unscrew the decorative cover by turning it counterclockwise. Then, remove the setscrew and pull off the handle like you would with a lever handle.

Unscrewing the Packing Nut

The packing nut is the round nut at the base of the faucet stem. You can usually see it when you remove the handle. Use an adjustable wrench to turn the nut counterclockwise. If it's too tight, apply some penetrating oil, let it soak for a few minutes, then try again.

AD

Once the nut is loose, unfasten it by hand and set it aside. You'll need it later when you reinstall the new faucet.

Removing the Faucet Stem

The escutcheon (the circular piece around the stem) can be Ofen pop off easily. If not, gently pry it off with a flathead screwdriver. Now, you should see the faucet stem attached to the faucet valve.

To remove the stem, you'll need a basin wrench. It's designed to reach into the tight space under the sink and has a locking mechanism that holds the nut steady while you loosen it. Turn the nut counterclockwise and pull out the stem.

AD

Removing the Faucet Valve

Now that the stem is out, turn the faucet handle to the 'on' position to open the valve. This allows any water left in the system to drain into the bucket you placed under the faucet.

Use an adjustable wrench to turn the valve counterclockwise. If the valve doesn't budge or is too rusty, apply some penetrating oil, let it soak, then try again.

Unscrewing the Valve Body

The valve body should now be loose enough to unscrew by hand. Turn it counterclockwise and pull it out. You might need to jiggle it a bit to break the seal.

AD

If the faucet is too old or damaged, parts might break off. In this case, you may need to call a plumber to remove the rest of the faucet safely.

Removing the Mounting Nuts

Finally, remove the mounting nuts that hold the faucet to the sink. You might need a basin wrench to reach them. Undo the nuts and pull out the faucet.

And that's it! You've successfully removed your bathroom faucet. The next step is to install the new one, but that's a story for another time.

Home maintenance is a rewarding task. Don't be afraid to tackle more DIY projects after this success. Until next time, happy fixing!

AD