how to raise garage

Boost Your Home Value: Step-by-Step Guide to Raise Your Garage

By Matthew White
AD

Raising the roof on your garage can seem like a daunting task, but with the right approach and knowledge, it's a project you can tackle with confidence. Here, we'll guide you through a comprehensive process, from planning to completion, to help you raise your garage to new heights - literally.

By the end of this guide, you'll understand how to prepare for the project, what materials and tools you'll need, and follow step-by-step instructions to ensure a professional finish. Let's dive in and start turning that low garage into a spacious, inviting space!

Essential Planning and Designing

Before you grab your toolbelt, it's crucial to plan and design your garage addition thoroughly. This includes sketching out your vision, determining building codes, and budgeting for the project.

AD
How to Raise Garage Floor to House Level - Convert to Bedroom Home Office or other Living Space
How to Raise Garage Floor to House Level - Convert to Bedroom Home Office or other Living Space
How to Raise / level the Floor. Turning a Garage into Living Space Part 2
How to Raise / level the Floor. Turning a Garage into Living Space Part 2
DIY - Garage Platform
DIY - Garage Platform

Consider hiring an architect or a professional garage designer to help you with the blueprint. They can provide expert advice, ensure your plans comply with local building codes, and help you avoid costly mistakes.

Garage Raising Basics

Garage raising involves constructing a new, taller frame around your existing garage. This new structure will be independent of your old garage, ensuring safety and stability. You'll then enclose the new frame with your choice of materials like wood, stucco, or vinyl siding.

It's a complex process that requires careful execution. Understanding the basics is key to ensuring a successful outcome.

Materials and Tools for the Job

Gathering the right materials and tools before you start ensures a smooth process. You'll need materials like 2x4 lumber, abused boards, engineered wood beams, and galvanized steel hangers. For tools, you'll need a circular saw, drill, level, tape measure, hammer, ladder, and safety gear like gloves and goggles.

AD

You might also need specialized tools depending on your project, such as a framing nailer or a sawzall. It's a good idea to have these on hand before you start to avoid disrupting your workflow later.

Building the Frame: Step-by-Step

Now that you've planned and gathered your materials, it's time to build the new frame for your raised garage.

Before you start, ensure the site is prepared. Remove any obstacles, level the ground, and install any necessary footings or foundations.

AD

Laying Out the Foundation

Measure and mark out where you want to build the new walls. Drive stakes into the ground at these points and connect them with a string level to create a perfect square or rectangle - the outline of your new garage.

Next, dig footings. The depth and width of the footings depend on your local building codes and the size of your garage. Ensure they're deep enough to sit below any frost line and wide enough to support the weight of the garage.

Constructing the Wall Frames

Using the 2x4 lumber, construct your wall frames. Ensure the new frame is larger than your existing garage to create the required extra headspace.

AD

When constructing the walls, always use a level to ensure they're plumb (vertical) and a square to ensure they're not twisted or warped. This will ensure your new garage is structurally sound and safe.

Raising the Frames

Once the wall frames are complete, it's time to raise them. This can be done with help from a few friends or, for larger projects, with the assistance of a crane or hoist.

Carefully position the wall frames in place, ensuring they're square and well-aligned. Use temporary braces to secure the frames until you can install the horizontal beams that will connect them.

Installing the Roof Trusses

With the walls in place, it's time to add the roof trusses. These will give your new garage its shape and add extra support to the walls.

Before installing the trusses, ensure the walls are plumb and well-aligned. This will make the installation process smoother and will ensure a sturdy, even roof.

Constructing the Trusses

Construct the trusses on the ground, using the blueprint as a guide. Use a level to ensure they're correctly angled and a square to ensure they're symmetrical.

Once you're satisfied with your trusses, carefully lift them and secure them to the top of the walls, using nails or screws. Ensure they're evenly spaced and well-aligned.

Installing the Roof Sheathing

After installing the trusses, it's time to add the roof sheathing. This will serve as the base for your roofing material and will help support the weight of the roof.

Use engineered wood beams or plywood for the sheathing, ensuring each piece overlaps the last by at least 2 inches. Start at the bottom of the roof and work your way up, using nails or screws to secure the sheathing to the trusses.

Congratulations! You've successfully raised your garage. With the new frame and roof in place, you can now install windows, doors, and siding to complete your project. Don't forget to inspect your work and ensure everything is level, plumb, and square. Enjoy your new, spacious garage!

AD