how to put track back on mini excavator

Reattach Mini Excavator Tracks: Step-by-Step Guide

By Christopher Martinez
AD

Has your mini excavator's rubber tracks given way, rendering your compact machine immobile? Don't despair; putting tracks back on a mini excavator is a task you can handle with the right tools, knowledge, and patience. This guide will walk you through the process, ensuring your excavator gets back to work in no time.

Before we dive into the process, ensure you have the required safety gear, including sturdy gloves, safety glasses, and appropriate clothing. Also, make sure your work area is clean, well-lit, and stable. Now, let's get started.

The Preparation: Gathering Tools and Materials

First, you'll need to gather the necessary tools and materials. This includes a new set of rubber tracks for your mini excavator's make and model, a hydraulic jack, a breaker bar, socket wrenches, a torque wrench, a pry bar, and an assistant to help with heavy lifting.

AD
a man sitting on top of a yellow bulldozer next to a pile of dirt
a man sitting on top of a yellow bulldozer next to a pile of dirt
Top 5 Uses of a Mini Excavator | Excavator
Top 5 Uses of a Mini Excavator | Excavator
Compact Excavator Showcase: The Latest Digger Tool Carriers from North America’s Leading Manufacturers
Compact Excavator Showcase: The Latest Digger Tool Carriers from North America’s Leading Manufacturers

Ensure your new tracks fit your excavator's model. Consult your owner's manual or contact your dealer if you're unsure. Having the wrong tracks can cause serious damage and void your warranty.

Safety First: Preparing the Excavator

Start by ensuring your excavator is on a stable, level surface. Engage the parking brake and use blocks to prevent any movement. Disconnect the hydraulic hose from the track adjuster and release any remaining pressure. Also, disconnect the hydraulic hose from the sprocket motor to avoid any accidental movement.

How to Operate a Mini-Excavator | Mini Excavator Controls
How to Operate a Mini-Excavator | Mini Excavator Controls
How to Operate the TYPHON 18 Mini Excavator | Retractable Tracks & Swing Boom Tutorial
How to Operate the TYPHON 18 Mini Excavator | Retractable Tracks & Swing Boom Tutorial

If your excavator has an attached dozer blade, raise it and lock it in the up position. This provides better access to the tracks and prevents any potential damage.

Removing the Old Tracks

Locate the pins that secure the tracks to the undercarriage. Using a breaker bar and socket wrench, loosen and remove the pins. You may need to use a pry bar to help remove the old tracks. Take note of how the tracks were positioned; you'll need this information later when installing the new ones.

AD

With the pins removed, use a hydraulic jack to lift the underside of the track frame. This will provide enough space to slide the old tracks out. Make sure to keep track of where each section goes, as there may be slight differences in their construction.

Installing the New Tracks

Before installing the new tracks, inspect them for any damage or irregularities. These should be straight and free of debris. Clean the undercarriage if necessary to prevent any contamination of the new tracks.

Begin installation by slidings the first section of the new track onto the undercarriage. Make sure to align it properly based on your notes from earlier. Secure the track using the pins you removed earlier, using the torque wrench to ensure they're tight but not overtightened.

AD

Securing the New Tracks

Work your way along the undercarriage, sliding in each section of the new track and securing it with the appropriate pins. Make sure to maintain the correct tension on the tracks. If there's too much slack, the tracks won't grip the ground properly. If they're too tight, they could overheat and cause damage.

Once all sections are in place and secured, reattach the hydraulic hoses to the adjuster and sprocket motor. Ensure they're connected correctly and free of leaks. Your mini excavator is now ready to roll again.

Remember, it's crucial to maintain your excavator's tracks regularly to prevent such issues in the future. This includes checking for wear, cleaning debris, and lubricating the undercarriage as needed.

AD
AD