how to put track back on mini excavator

Replacing Mini Excavator Tracks: A Step-by-Step Guide

By James Walker
AD

If you've recently noticed your mini excavator's tracks displaying signs of wear or damage, chances are, you're in need of replacing them. But how do you skillfully remove the old tracks and install new ones? In this comprehensive guide, we'll walk you through the process, so you can get your mini excavator back to work in no time.

Before we delve into the step-by-step process, let's briefly discuss why replacing tracks is so important. Mini excavator tracks, designed to withstand heavy-duty work, do wear out over time. Replacing them when necessary guarantees optimal performance, enhanced safety, and prevents potential damage to the machine's undercarriage.

Preparation: Tools and Safety Measures

To begin, gather your tools and ensure you've taken the necessary safety precautions. You'll need a jack, jack stands, pry bars, a cotter pin removal tool, and of course, your new tracks.

AD
Top 5 Uses of a Mini Excavator | Excavator
Top 5 Uses of a Mini Excavator | Excavator
Compact Excavator Showcase: The Latest Digger Tool Carriers from North America’s Leading Manufacturers
Compact Excavator Showcase: The Latest Digger Tool Carriers from North America’s Leading Manufacturers
A Hilariously Tiny Mini Excavator - Core77
A Hilariously Tiny Mini Excavator - Core77

Safety first: With the engine off and the machine on level ground, apply the parking brake and block the opposite side of the tracks you're about to remove. Wear protective gloves and eyewear to shield against debris, and have a first aid kit handy just in case.

Step 1: Lifting and Supporting the Machine

Use a jack to lift the side of the mini excavator where you plan to replace the tracks. When the track is clear of the ground, place a jack stand under the machine's frame for secure support.

How to Operate a Mini-Excavator | Mini Excavator Controls
How to Operate a Mini-Excavator | Mini Excavator Controls
Mini excavator technology, good machinery and good tools to save time and effort
Mini excavator technology, good machinery and good tools to save time and effort

Repeat this process on the opposite side to fully lift the machine and expose the undercarriage. This will grant you ample space to work on the tracks.

Step 2: Removing the Old Tracks

Begin by removing the cotter pin from the track chain with a cotter pin removal tool. Once the pin is out, use pry bars to disengage the track from the sprocket. You may need to use some force to break the track's tension, so be prepared and be careful.

AD

Working from the front of the machine, carefully guide the old track out of the track roller and out from under the machine. It's helpful to have an assistant to aid in guiding and pulling the heavy track.

Installing the New Tracks: Reverse of Removal

With the old tracks removed, it's time to install the new ones. The process is essentially the reverse of track removal, so you'll perform the steps in reverse order.

Before you start, make sure the new tracks are compatible with your mini excavator. Tracks differ based on size, make, and model of the machine, so confirm that you've purchased the correct pair.

AD

Step 1: Aligning the New Track

Starting from the front of the machine, position the new track aligned with the sprocket. Make sure the lacing matches up properly.

Insert the new cotter pin through the hole in the track and through the sprocket, securing the track in place.

Step 2: Tensioning and Reinstalling

Using pry bars, carefully push the new track into the track roller. The track should click into place as it goes around the idlers and rollers.

AD

Lower the jack and slowly allow the machine to settle onto the new track. As the weight of the machine applies pressure, the tension on the track will increase. Be alert for anyIncorrect alignment or binding as the machine settles.

Once the machine is fully lowered, double-check that the cotter pin is securely in place, and the new track is correctly aligned and tensioned. Give your mini excavator a test run on a safe, open area to ensure everything is functioning properly. That's it! You've successfully replaced your mini excavator's tracks and are ready to tackle your next project.

AD