how to put andis clippers back together

"Easy Steps: Reassemble Andis Clippers - Complete Guide"

By Steven Walker
AD

Is your Andis clipper giving you a hard time because it's fallen apart? Don't worry, putting it back together is not as daunting as it seems. With a bit of patience and this comprehensive guide, you'll have your Andis clipper back in working condition in no time. So, grab your tools, and let's dive right in.

Before we start, safety first! Unplug your Andis clipper from the power source and ensure there are no remaining batteries. Also, gather your tools - a small screwdriver (usually provided with your clipper), a sharp knife or a pick tool, and a small brush for cleaning.

Disassembling Your Andis Clipper

Reassembling your clipper begins with taking it apart. Don't fret; it's just as easy as taking it apart the first time. Here's how:

AD
How To repair Your Electronic Hair Clippers Spring Attachment
How To repair Your Electronic Hair Clippers Spring Attachment
An Expert’s Complete Guide on How to Clean and Oil Clippers in 2021👈
An Expert’s Complete Guide on How to Clean and Oil Clippers in 2021👈
De-gunk & Disinfect your Clippers with Sid Sottung | Andis
De-gunk & Disinfect your Clippers with Sid Sottung | Andis

Start by removing the blade. Use the small screwdriver to gently pry off the blade cover. Then, carefully slide the blade out of its slot. You might need to use a sharp knife or pick tool to help it along.

Removing the Blade

Once the blade is off, unscrew the clipping lever. It's usually held in place by a single screw. Remove the screw using your small screwdriver, and lift the lever out.

Andis How to open and close clippers
Andis How to open and close clippers
blade guide - Andis
blade guide - Andis

Now, you'll see the main body of your clipper. It's likely secured by a few screws. Remove these screws to further disassemble your clipper.

Unscrewing the Body

With the screws removed, gently separate the body of your clipper. You might need to use a bit of force, but be careful not to damage any of the internal components.

AD

Cleaning the Internal Components

With the body of your clipper open, it's a great time to give it a thorough clean. Cleaning your clipper regularly extends its lifespan and keeps it running smoothly.

Use your small brush to clean off any hair or debris from the internal components. Be gentle not to damage any of the parts. Once you're satisfied with the cleanliness, it's time to start putting your clipper back together.

Reassembling the Body

Start by putting back the main body of your clipper. Ensure all internal components are correctly aligned and then screw it back together.

AD

Next, replace the clipping lever by sliding it back into place and securing it with the screw.

Replacing the Blade

Replacing the blade is the reverse of removing it. Ensure the blade is correctly aligned with the clipper's teeth. Then, slide it back into place and secure with the blade cover.

Putting the Final Touches

With the main components back in place, your clipper should be looking good as new. But before you plug it back in, there's one more thing to check:

AD

Plug in your clipper to ensure it's working correctly. If it doesn't, double-check that all components are securely fastened and correctly aligned. If it still doesn't work, there might be an issue with the internal components that requires professional help.

And there you have it! You've successfully put your Andis clipper back together. Regular cleaning and gentle use will keep your clipper in top condition. Happy clipping!

AD