how to put andis clipper blades back together

Easy Blade Reassembly: How to Put Andis Clipper Blades Back Together

By Olivia Miller
AD

Are you a barber or groomer with Andis clipper blades that need re-assembling? Fear not! With a little patience and precision, you can put them back together like a pro. This step-by-step guide will walk you through the process, ensuring your clipper blades are ready to deliver that perfect fade or taper.

First, it's crucial to understand that Andis clipper blades come apart relatively easily. But before you begin, ensure your blades are clean, dry, and have no debris or hair remnants to avoid any issues during reassembly.

Understanding Andis Clipper Blades

Before we dive into reassembly, let's demystify the components of Andis clipper blades:

AD
How to sharpen hair clippers
How to sharpen hair clippers
Wahl clipper - How to take put blades and pieces back together
Wahl clipper - How to take put blades and pieces back together
How To Sharpen Clipper Blades With Sandpaper? | How To Sharpen Clipper Blades
How To Sharpen Clipper Blades With Sandpaper? | How To Sharpen Clipper Blades

Top Cap: This is the upper part of the blade that covers the mechanism and slot for the blade adjustment lever. It also houses the teeth.

Bottom Blade

The bottom blade is the base of the assembly, containing the adjustable tension screw, and the locking lever that holds the top cap in place.

How To Clean Clipper Blades
How To Clean Clipper Blades
How to Sharpen clipper blades
How to Sharpen clipper blades

It's designed to work in conjunction with the top cap to create the cutting action.

Tooth Comb

The tooth comb is the stripping of teeth at the front of the blade. It can be adjusted to create a variety of taper and fade effects.

AD

The adjustable lever allows you to slide the teeth comb forward or backward to adjust the taper length.

Step-by-Step Blade Reassembly

Now that you're familiar with the components, let's dive into reassembling your Andis clipper blades:

Remove the Top Cap

Start by removing the top cap from the bottom blade. With the blade tip pointing away from you, hold the bottom blade with one hand and pull the top cap off using your other hand.

AD

Be careful not to break the snap-fit connectors or cause any damage.

Clean the Blade Assembly

Next, clean both the top cap and bottom blade thoroughly. Use a brush or compressed air to remove any hair or debris. This step is crucial to prevent any issues when reassembling the blade.

Do not submerge the blades in water or use cleaning solutions, as this can cause damage or corrosion.

AD

Reattach the Top Cap

Hold the bottom blade securely with one hand and the top cap with the other. Align the top cap with the bottom blade, ensuring the teeth are correctly meshed.

Apply even pressure, and snap the top cap back onto the bottom blade. You should hear a click as each of the snap-fit connectors locks into place.

Check and Adjust the Taper

Verify that the taper is set appropriately for your desired cut. If not, loosen the adjustable tension screw on the bottom blade with a flathead screwdriver, slide the tooth comb to the desired setting, and then retighten the screw.

Test the blade on a scrap of material or your hand to ensure it works correctly before using it on a client.

Test the Blade

Once reassembled, turn the clipper on and run the blade through your hand or a scrap of hair to ensure it cuts evenly. If the blade isn't cutting consistently, you may need to adjust the tension or clean the blade again.

Congratulations! Your Andis clipper blades are now ready for a smooth, high-quality cut.

Regularly cleaning and maintaining your clipper blades will extend their lifespan and ensure consistent performance. If you're ever unsure about the reassembly process, don't hesitate to consult the user manual or contact Andis customer support. Happy grooming!

AD