how to put a blade on a weed eater

How to Install a Blade on a Weed Eater

By Nicole Clark
AD

Attaching a blade to your weed eater, or string trimmer, might seem daunting, but with the right guidance, it's a simple task that can save you money and keep your gardening tools in top shape. Let's guide you through the process step by step, ensuring you have the correct tools and safety precautions in place.

Before you begin, gather your materials: your weed eater, a new spool of trimming line (make sure it's compatible with your model), and a pair of scissors or a line cutter. Safety glasses are also recommended to protect your eyes during the procedure.

Understanding Your Trimmer

There are two main types of trimmers: bump feed and automatic feed. Bump feed trimmers require you to bump the bottom of the trimmer head on the ground to feed more line, while automatic feed trimmers do this automatically as you use them. The process we're about to describe works for both types.

AD
How To Convert A String Trimmer To A Brush Cutter - Hunker
How To Convert A String Trimmer To A Brush Cutter - Hunker
How To Put A Saw Blade On A String Trimmer | ECHO SRM-3020
How To Put A Saw Blade On A String Trimmer | ECHO SRM-3020
a man is using a blower to cut the sidewalk
a man is using a blower to cut the sidewalk

Take a moment to locate the spool housing on your trimmer. It's typically near the head of the trimmer, where the trimmer line emerges. This housing may be secured by a small nut or a twist-lock mechanism.

Preparing the New Spool

Start by removing the old spool, if necessary. On a bump feed trimmer, you'll need to bump the head on the ground until the entire line is retracted. Then, unlock and remove the spool housing. On an automatic feed trimmer, slide the line out of the head until no more line can be removed, then unlock and remove the housing.

BEST Brush Cutter blade for your string trimmer! | How to install brush cutter blade on weed eater
BEST Brush Cutter blade for your string trimmer! | How to install brush cutter blade on weed eater

Your new spool of trimming line will likely be wound around a plastic hub. Before installing it, you'll need to cut the line to the correct length. Most trimmers require a line length of about 8 to 10 feet, but this can vary depending on your model. Consult your user manual for the specific length needed for your trimmer.

Loading the New Spool

Once you've cut the line to the correct length, insert the end of the line through the hole in the spool hub. Then, wind the line clockwise around the hub, ensuring it's taught but not too tight. You want the line to wind smoothly and not bunch up.

AD

When you've wound the line to the end, insert the line back through the hole in the hub. This will keep the line in place while you install the spool in your trimmer. The line should extend out from the spool in a straight line, with no loops or twists.

Installing the Spool in Your Trimmer

Now that your new spool is prepared, it's time to install it in your trimmer. Replace the spool housing on your trimmer, feeding the line through the hole as you do so. For a bump feed trimmer, the line should be long enough to reach the ground without needing to bump the head. For an automatic feed trimmer, the line should be long enough to trigger the automatic feed mechanism.

Secure the spool housing in place: on a bump feed trimmer, replace the nut and tighten it by hand. On an automatic feed trimmer, secure the housing with the twist-lock mechanism. Make sure your trimmer is now ready to use, with the line extending the correct length from the head.

AD

Checking Your Work

Before you start trimming, check your work to ensure everything is properly installed. Pull gently on the line to ensure it feeds smoothly and doesn't get caught in the head. If it doesn't feed smoothly, you may need to readjust the line or wind it differently on the spool.

Always remember to test your trimmer before you start working in earnest. This can help you avoid potential issues and ensure that your new spool of line is working correctly. If you've done everything correctly, your trimmer should be ready to tackle any weeds or grass that come its way.

That's it! You've now successfully installed a new blade, or rather, a new spool of trimming line, on your weed eater. With this knowledge, you're ready to keep your trimmer running smoothly and efficiently, ensuring those unwanted weeds don't stand a chance in your garden.

AD
AD