how to put a belt on a hoover windtunnel

Mastering Hoover WindTunnel: Easy Belt Replacement

By Thomas Lewis
AD

Having a hoover with a WindTunnel can significantly enhance your cleaning experience. But how do you put a belt on this nifty tool? Don't worry, it's simpler than you think. In this step-by-step guide, we'll walk you through the process. Let's get started.

Before you begin, ensure your hoover is unplugged and all attachments have been removed for safety and to provide a clear workspace.

Understanding Your Hoover's WindTunnel

The hoover WindTunnel is designed to create dual air channels for efficient cleaning. To maintain this, it's crucial to understand that the belt is integral to the suction process.

AD
Hoover WindTunnel Repair Video - How To Replace The Belts
Hoover WindTunnel Repair Video - How To Replace The Belts
How To Replace Hoover Windtunnel Belt Littleton Colorado
How To Replace Hoover Windtunnel Belt Littleton Colorado
How to change the belt on Hoover Windtunnel Self Propelled
How to change the belt on Hoover Windtunnel Self Propelled

Hence, when replacing or installing a belt, ensure it's the correct type for your WindTunnel hoover. You can usually find this information in your hoover's manual or by checking the model number online.

Determining Belt Direction

First, locate the belt. It should be wrapped around the motor and the agitator (the brush roll at the base of your hoover).

Hoover WindTunnel Air Bagless Upright Replacing The Belt UH70400
Hoover WindTunnel Air Bagless Upright Replacing The Belt UH70400

Before removing the old belt or installing a new one, look at the current belt's direction. The belt should rotate clockwise when the hoover is turned on. Mark this direction for reference while installing the new belt.

Removing the Old Belt

Now, let's remove the old belt. First, pinch the belt hooks at both ends to release the tension. Then, gently slide the belt off.

AD

If the belt is broken or worn out, now's the time to discard it. Keep the type of belt in mind for purchasing a replacement, as belts can vary between hoover models.

Installing the New Belt

With the old belt removed, it's time to install the new one. First, ensure your new belt matches the same type and size as your hoover's previous belt.

Next, place the new belt over the motor and then lay it on top of the agitator. The belt should span the width of the motor and agitator.

AD

Securing the Belt

Once you've laid the belt over both components, locate the belt hooks. Pinch the hooks to stretch the belt and wrap it around the motor and agitator.

Secure the belt by sliding the hooks back into their respective slots, ensuring the belt maintains tension. You should hear the belt tread Firmly against both the motor and agitator.

Testing the Belt

Before using your hoover, test the belt by manually rotating the agitator. It should spin freely and smoothly, ensuring the belt is correctly installed.

AD

If there's no resistance or the belt slips under pressure, adjust the belt tension and make sure the belt is correctly aligned with the motor and the agitator. If problems persist, it may be best to contact a professional. Always remember, prevention is better than cure - keep your hoover and its parts well-maintained for longevity.

Now that you've mastered how to put a belt on your hoover WindTunnel, any cleaning issues should be a breeze to solve. Happy cleaning!

AD