how to replace the belt on a hoover windtunnel

Step-by-Step: Replacing Belt on Hoover WindTunnel

By Amanda Davis
AD

At some point, your Hoover WindTunnelbagless vacuum cleaner may need a new belt. Regular wear and tear can cause the belt to wear out, resulting in reduced suction power or the unit ceasing to work altogether. Replacing the belt is a straightforward task that you can perform at home to save repair costs and time. Here's a comprehensive guide on how to replace the belt on your Hoover WindTunnel bagless vacuum cleaner.

Before you begin, ensure you have the following tools and materials ready: a flathead screwdriver, the replacement belt (ensure it's compatible with your vacuum model), and a small, soft-bristle brush for cleaning.

Assessing the Damage and Gathering Materials

First, check the current condition of your vacuum's belt. If it appears stretched, broken, or showing signs of wear, it's time for a replacement. Make sure you purchase the correct belt for your specific Hoover WindTunnel model. You can find the model number and belt size in your user manual or by looking it up on Hoover's official website.

AD
Hoover WindTunnel Repair Video - How To Replace The Belts
Hoover WindTunnel Repair Video - How To Replace The Belts
How To Replace Hoover Windtunnel Belt Littleton Colorado
How To Replace Hoover Windtunnel Belt Littleton Colorado
Hoover WindTunnel Air Bagless Upright Replacing The Belt UH70400
Hoover WindTunnel Air Bagless Upright Replacing The Belt UH70400

Replace both the drive andastasendeuencer belts at the same time to ensure optimal performance and prevent frequent replacements. These belts are typically not sold as a pair, so you'll need to purchase them separately.

Disassembling Your Hoover WindTunnel

Begin by unplugging the vacuum from the power source to ensure safety during the process. Then, follow these steps to disassemble your Hoover WindTunnel:

Vacuum Belts Replacement for Hoover WindTunnel Air Upright Vacuum Cleaner, Vacuum Cleaner Belts Replace Parts 562535001, Fit Models UH70400, UH70401,
Vacuum Belts Replacement for Hoover WindTunnel Air Upright Vacuum Cleaner, Vacuum Cleaner Belts Replace Parts 562535001, Fit Models UH70400, UH70401,
Topvacuumparts Replacement Part For Hoover Windtunnel 3 Drive Belt Fits U5433-900, U5433900, U5720900, U5720990, U5761900, U5344900# Part 17384
Topvacuumparts Replacement Part For Hoover Windtunnel 3 Drive Belt Fits U5433-900, U5433900, U5720900, U5720990, U5761900, U5344900# Part 17384
  1. Remove the dirt canister by pressing the release button and lifting it off the unit.
  2. Locate and remove the bottom access panel using a flathead screwdriver. This will grant you access to the belts.

Removing the Old Belts

To remove the old belts, follow these steps:

  1. Identify the drive and dustfinder belts. The drive belt is typically black and powers the brushroll, while the dustfinder belt is usually clear and operates the cyclonic cleaning system.
  2. Use a flathead screwdriver to release the tension on the belt retention clips. These clips are located on both sides of the belts.
  3. Slide the old belts off their respective pulleys and remove them from the vacuum.

Installing the New Belts

Now that you've removed the old belts, it's time to install the new ones. Follow these steps for proper installation:

AD
  1. Ensure the new belts are clean and free of any debris or dust. A soft-bristle brush can be used to gently clean the belts.
  2. Align the new belts with their corresponding pulleys and route them around the appropriate components.
  3. Reattach the belt retention clips to secure the new belts in place. Ensure the clips are properly seated and provide the correct amount of tension for each belt.

Reassembling Your Hoover WindTunnel

With the new belts installed, it's time to reassemble your vacuum cleaner:

  1. Reattach the bottom access panel using the flathead screwdriver. Ensure it's securely fastened to prevent dust and debris from entering the vacuum's interior.
  2. Reinstall the dirt canister by aligning the arrows on the canister and the vacuum, then press down until it locks into place.

Congratulations! You've successfully replaced the belt on your Hoover WindTunnel bagless vacuum cleaner. Regularly inspecting and replacing the belts on your vacuum will help ensure its longevity and maintain optimal performance. Should you encounter any issues or need further assistance, don't hesitate to consult Hoover's official website or contact their customer support for additional guidance.

AD