how to program a key fob dodge ram

Dodge Ram Key Fob Programming: Step-by-Step Guide

By Daniel Miller
AD

Have you recently purchased a Dodge Ram and are eager to program your new key fob? You've come to the right place. This comprehensive guide will walk you through the process step by step, ensuring you're on the road in no time. Let's dive in!

Before we get started, it's crucial to gather a few things. You'll need two existing key fobs and the vehicle's ignition key. Also, ensure the vehicle is in park and the ignition is off. Now, let's begin.

Preparing Your Dodge Ram for Programming

First, you need to prepare your vehicle. Locate the driver's door lock switch, usually on the center console. You'll use this to initiate the programming sequence.

AD
OBD Programmer Tool Program DIY Remote Car Key For Dodge 2013 2014 2015 2016 2017 RAM 1500 2500 3500
OBD Programmer Tool Program DIY Remote Car Key For Dodge 2013 2014 2015 2016 2017 RAM 1500 2500 3500
Program Diy Key Replacement Kit For Dodge Ram 1500 2013 2014 2015 2016 2017
Program Diy Key Replacement Kit For Dodge Ram 1500 2013 2014 2015 2016 2017
Parts Department | Burtness Chrysler Dodge Jeep Ram
Parts Department | Burtness Chrysler Dodge Jeep Ram

The vehicle's onboard computer needs to recognize the new key fob. To do this, you'll insert the ignition key and start the vehicle in a specific manner. Let's explore this process.

Initiating the Programming Sequence

Insert the ignition key into the ignition and turn it to the 'On' position without starting the engine. Leave it there for about 10 seconds. This puts the vehicle in programming mode.

Programming a new key fob at home (NO DEALERSHIP!) All Jeep, Dodge and Chrysler vehicles.
Programming a new key fob at home (NO DEALERSHIP!) All Jeep, Dodge and Chrysler vehicles.
How to Program an Extra Key Fob Dodge Caravan / Chrysler Town & Country 2001-2007 (Complete Guide)
How to Program an Extra Key Fob Dodge Caravan / Chrysler Town & Country 2001-2007 (Complete Guide)

Now, remove the key from the ignition. You should see the locks on your vehicle cycle. If they don't, repeat the process until they do. This means the vehicle is ready to accept new fobs.

Programming Your New Key Fob

With the vehicle ready, it's time to program your new key fob. Hold the driver's door lock switch on the center console. While holding it, press the 'Lock' button on your new key fob. Keep holding the switch until the locks cycle again.

AD

When the locks cycle, release both the switch and the fob button. You've just added a new key fob to your Dodge Ram. Repeat this process with any additional key fobs you want to program.

Verifying the Success of the Programming

Once you've programmed your key fob, it's essential to verify that it's working correctly. After all, there's nothing worse than realizing your new fob isn't working after you've left your keys inside the vehicle!

Test your new key fob by pressing the 'Lock' and 'Unlock' buttons. The vehicle's locks should respond as expected. If they don't, repeat the programming process with the troublesome fob.

AD

Removing a Programmed Key Fob

There might come a time when you need to remove a programmed key fob from your Dodge Ram. Perhaps you lost it, or maybe you're selling the vehicle. Whatever the reason, the process is similar to programming a new fob.

Insert the ignition key and turn it to the 'On' position without starting the engine. Leave it there for about 10 seconds, then remove the key. Now, press and hold the driver's door lock switch on the center console. While holding it, press and hold the 'Lock' button on the key fob you want to remove.

Keep holding both until the locks cycle, then release them. Congratulations, you've just removed a programmed key fob from your Dodge Ram.

AD

Programming your key fob might seem daunting at first, but with this comprehensive guide, you're well on your way to mastering this skill. So, get out there, program your fob, and enjoy your new Dodge Ram!

AD