Mastering WS1040: A Step-by-Step Guide to Programming
Embarking on a journey to program the Whistler WS1040 barcode scanner can seem daunting at first, but with the right guidance, it can be an exciting and rewarding experience. This robust device offers a range of functionalities that can enhance various applications, from inventory management to retail POS systems. This article will guide you through the process, ensuring you understand not just how to program the WS1040, but also why certain commands are used.
The Whistler WS1040 is a versatile linear imager barcode scanner that supports a wide range of symbologies, including UPC/EAN, Code 128, Code 39, and others. It's known for its advanced decoding algorithms and high-read speed, making it a popular choice for businesses. But to leverage these features, you need to know how to program the scanner.
Getting Started: Understanding the Basics
Before you dive into programming, it's essential to grasp some fundamentals. The WS1040 uses a configuration method called Programming by Keyboard (PBK) or Programming via Keyboard. This allows you to control the scanner's operation, such as setting the decode trigger, selecting symbologies, and more.
For PBK, you'll need a USB cable to connect the scanner to your computer. Once connected, you can open a terminal emulation software like PuTTY or Tera Term to send commands to the scanner.
Understanding Scanner Modes
The WS1040 operates in various modes, each with specific functionalities. Initially, the scanner is in the ' Learner Mode', which is ideal for programming. Let's dive into the types of modes and why they're crucial:
- Learner Mode: This mode allows you to program the scanner. It's the first mode your scanner will be in when you power it up.
- Code Mode: In this mode, the scanner decodes barcodes and sends the data to your host system. It's the mode you'll typically use during normal operation.
Setting Up Your Terminal Emulation Software
To interact with the scanner, you'll need to configure your terminal emulation software correctly. Here's a step-by-step guide to set up PuTTY:
- Open PuTTY and enter the scanner's IP address in the 'Host Name (or IP address)' field.
- Set the 'Port' to 23000, as this is the default communication port for the WS1040.
- Under 'Category' expansion, select 'Serial' and configure as follows:
- Speed: 115200
- Data Bits: 8
- Stop Bits: 1
- Parity: None
- Data Bits: 8
Programming the Whistler WS1040: Essential Commands
Now that you've set up your terminal emulation software, it's time to dive into programming the WS1040. Here are some essential commands and their purposes:
Note: To exit Learner Mode and save your settings, enter the command 'SAVE' followed by 'EXIT'.
Setting the Decode Trigger
The decode trigger determines when the scanner sends decoded data to your host system. You can set it to 'Pull' (scanner polls host) or 'Push' (scanner initiates data transfer). Here's how:
- Enter 'TRIGGER 0 PUSH' to set the trigger to 'Push'.
- Enter 'TRIGGER 0 PULL' to set the trigger to 'Pull'.
Selecting Symbologies
To enable or disable specific symbologies, use the following commands. For example, to enable UPC/EAN and disable Code 128, you would enter:
- ENABLE UPC
- DISABLE 128
Advanced Programming: Customizing the Scanner's Behavior
With the basics under your belt, let's delve into some advanced programming to customize your scanner's behavior. These commands allow you to fine-tune the scanner's performance for your specific application.
Setting Decode Options
The WS1040 offers various decode options to enhance its performance. For instance, you can enable 'Lens' to improve decode speed and reliability:
Enable lens: LENS 1
Customizing Beeper and LED Behavior
The scanner's beeper and LED provide audible and visual feedback. You can customize their behavior with these commands:
- Beeper volume: BEEP 5 (0-7, with 7 being the loudest)
- LED intensity: LED 5 (0-15, with 15 being the brightest)
Now that you've learned how to program the Whistler WS1040, it's time to put your newfound knowledge into practice. Start by setting up your terminal emulation software, then experiment with different commands to see how they affect the scanner's operation.