how to polish axles pinewood derby

Boost Your Derby: Expert Guide to Polishing Pinewood Axles

By Rachel Hernandez
AD

Ready to give your Pinewood Derby® car an edge? Polishing axles can significantly reduce friction and potentially improve your car's performance. Let's dive into the world of axles and learn how to polish them to a mirrored shine for that extra boost at the starting line.

Remember, the goal is to reduce friction by smoothing out the axle's surface. This guide assumes you're using the official BSA Pinewood Derby® axles, which are made of hardened steel. Let's explore the process step by step.

Gathering Your Tools and Materials

Before you start, gather your tools and materials. You'll need:

AD
How to Polish Your Pinewood Derby Car's Axles and Wheels
How to Polish Your Pinewood Derby Car's Axles and Wheels
How to Polish the Axles on Your Pinewood Derby Car
How to Polish the Axles on Your Pinewood Derby Car
How to Polish Your Pinewood Derby Car's Axles and Wheels
How to Polish Your Pinewood Derby Car's Axles and Wheels
  • BSA official Pinewood Derby® axles
  • 120-grit, 220-grit, and 400-grit sandpaper (wet/dry silk finish)
  • Fine Wet/Dry Silicon Carbide Sanding Paper
  • Polishing compound (like Jeweler's Rouge)
  • Polishing cloth or cotton pads
  • Microfiber cloth
  • Water and dish soap for cleaning

Having the right tools ensures a smooth and efficient polishing process.

Preparing the Axles for Sanding

First, remove any burrs or sharp edges from the axles using your 120-grit sandpaper. This step ensures a smooth surface and prevents injuries.

Pinewood Derby Axle Polishing Kit
Pinewood Derby Axle Polishing Kit
DerbyChamp- Polishing Axles Part 1
DerbyChamp- Polishing Axles Part 1

Next, clean the axles with mild dish soap and water. Ensure all dirt and debris are removed, as these can interfere with the sanding process.

Sanding the Axles

stratification, using progressively finer grit sandpaper (220-grit, 400-grit, and Fine Wet/Dry Silicon Carbide). Wet the sandpaper and sand the axles in one direction, following the length of the axle. Avoid sanding in a circular motion, as this can create scratches perpendicular to the axle's axis, defeating our friction-reduction goal.

AD

After each sanding stage, clean the axles with mild dish soap and water, then inspect them for any leftover sandpaper particles. Be patient; this step takes time and careful attention to detail.

Polishing the Axles

Now that you've sanded the axles to a smooth finish, it's time to polish them to a mirror shine. This step significantly reduces friction and gives your car a competitive edge.

Apply a small amount of polishing compound (like Jeweler's Rouge) to a polishing cloth or cotton pad. Rub the axle evenly in one direction, following the axle's length. Use a light touch, applying even pressure throughout the process. Reapply polishing compound as needed.

AD

Buffing the Axles

After polishing, It's time to buff the axles to a mirror shine. Use a microfiber cloth for this step. Fold the cloth in half, revealing a clean, lint-free edge. Rub the axle using the same technique as polishing, applying even pressure and maintaining a consistent direction.

Inspect your axles frequently during the buffing process. You're aiming for a flawless, glossy finish that reflects like a mirror. If necessary, repeat the polishing and buffing steps to achieve the desired result.

Finishing Up

Once you're satisfied with the results, give your axles a final cleaning with mild dish soap and water. Dry them with a clean cloth, ensuring no water residue remains. Allow them to air dry for a few minutes to prevent smudges.

AD

Congratulations! You've successfully polished your Pinewood Derby® axles. With your newfound knowledge, you're ready to pit your perfectly polished axles against the competition.

Remember, the key to successful axle polishing is patience, attention to detail, and a commitment to using the right tools. Now go out there and make your mark on the Pinewood Derby® track! Happy racing!

AD