how to pair 2 altec lansing speakers

How to Pair 2 Altec Lansing Speakers: A Step-by-Step Guide

By Emily Davis
AD

Investing in a pair of Altec Lansing speakers can significantly enhance your audio experience, whether you're listening to music, watching movies, or gaming. However, pairing them correctly is crucial to ensure a seamless, high-quality sound. Here's a step-by-step guide to help you pair your Altec Lansing speakers effortlessly.

Before we dive in, ensure both speakers are powered off and unplugged from any devices they're currently connected to. This initial step helps prevent potential interferences and ensures a smooth pairing process.

Understanding Your Speaker Configuration

Altec Lansing speakers often come in different configurations, such as left/right or front/rear pairs. Understanding your speaker configuration is the first step in pairing them correctly.

AD
How to Pair Altec Lansing Speaker with Android, iOS & Windows
How to Pair Altec Lansing Speaker with Android, iOS & Windows
Great Plain Acoustics drivers and speakers where Altec Legend Lives on
Great Plain Acoustics drivers and speakers where Altec Legend Lives on
Explore 19 Ways To Make Old Speakers Sound Better
Explore 19 Ways To Make Old Speakers Sound Better

For example, in a surround sound setup, you would typically have one pair each for the front left, front right, rear left, and rear right channels. Familiarize yourself with your specific configuration to ensure you pair the correct speakers together.

Identifying Speaker Pairs

Upon inspecting your speakers, you might notice a 'L' or 'R' etched on one end of each speaker. These indicate the left or right channel, respectively. Speakers with the same designation (e.g., both with an 'L') are meant to be paired together. If your speakers do not have these markings, check your user manual or Altec Lansing's website for further guidance.

How to Connect 2 Speakers to 1 Amplifier
How to Connect 2 Speakers to 1 Amplifier

In some cases, you may have 'front' and 'rear' speakers instead. Front speakers are typically placed in front of you, while rear speakers are positioned behind you. Again, ensure you pair up speakers with the same designation.

Pairing Your Speakers

Once you've identified your speaker pairs, it's time for the actual pairing process. This usually involves syncing one speaker to another using infrared (IR) or Bluetooth technology. The specific process varies by model, but here's a general guide:

AD
  1. Ensure both speakers are powered off.
  2. Plug in and turn on your left speaker. It should now be in pairing mode.
  3. Pick up your right speaker, also plug it in and turn it on. As you do this, point the infrared receiver (usually located on the front) of the right speaker towards the left speaker.
  4. The right speaker should detect the left speaker's infrared signal and pair with it. You'll usually see a confirming light or hear a beep once they're paired.

If your speakers are Bluetooth-enabled, simply follow the pairing instructions in your user manual or refer to Altec Lansing's website for specific model instructions.

Placing Your Speakers for Optimal Sound Quality

Proper placement of your speakers can greatly enhance your audio experience. Here's a simple guideline:

For a standard stereo setup, place the left speaker on the left side of your room and the right speaker on the right side, at the same height and distance from your listening position. If your speakers are angle-adjustable, angle them inward slightly, with the center tossing towards your listening position.

AD

For surround sound setups, follow the below steps:

  • Place your front left and front right speakers in front of you, slightly angled towards your listening position.
  • Position your rear left and rear right speakers behind you, at the same height and distance from your listening position.

Testing the Setup

Once your speakers are paired and positioned, it's time to test your setup. Plug in your music device, press play, and listen for any discrepancies between the channels. If you notice any imbalances, you may need to readjust the speaker positions or perform a recalibration (if your system supports it).

Ensure you test your setup with various genres of music and potentially a movie or video game to get a well-rounded perception of your sound system.

AD

Congratulations! You've successfully paired and set up your Altec Lansing speakers. Now sit back, crank up the volume, and enjoy your enhanced audio experience. Remember, your speakers are an investment, and with the right care, they'll deliver exceptional sound quality for years to come.

AD