how to open blink camera to change battery

"Upgrading Your Blink Camera: Seamless Battery Replacement Steps"

By Emily Anderson
AD

Got a Blink camera and need to change the battery? You're in the right place. Here's a simple, step-by-step guide to help you through the process.

No need to worry, it's a straightforward process that anyone can follow. So, let's dive right into it!

Preparation: Gather Your Tools

Before you start, make sure you have everything you need:

AD
Blink Camera Won’t Connect - Ready To DIY
Blink Camera Won’t Connect - Ready To DIY
How to Open Blink Outdoor Camera
How to Open Blink Outdoor Camera
How to Update Blink Camera Firmware | 10 Easy Steps (2026)
How to Update Blink Camera Firmware | 10 Easy Steps (2026)
  • A new battery (ensure it's the correct type and size)
  • A coin (usually a quarter works well) for actuating the battery compartment
  • optionally, a flathead screwdriver if your Blink camera uses one

Choosing the Right Battery

First things first, you need to ensure you're using the correct battery. Blink cameras typically use lithium coin cell batteries, like a CR2032 or CR123A, depending on the camera model.

Always check your camera manual to ensure you're using the right battery. Using the wrong battery can damage your camera or pose safety hazards.

How to Adjust Blink Camera Settings | 10 Easy Methods (2026)
How to Adjust Blink Camera Settings | 10 Easy Methods (2026)
How To Set Up And Connect Blink Camera In 6 Steps: Easy Guide | Smart Home Scope
How To Set Up And Connect Blink Camera In 6 Steps: Easy Guide | Smart Home Scope

Understanding Your Camera's Battery Compartment

Each Blink camera model has a unique battery compartment design. Some use a coin to actuate a lever, while others use a flathead screwdriver to remove a cover.

again, checking your camera manual can save you frustration and prevent damage.

AD

Removing the Battery

Alright, let's get started. The first step is removing the old battery.

Actuating the Battery Compartment

If your Blink camera uses a coin, insert it into the slot and twist it gently to release the battery compartment. If it uses a screwdriver, carefully pry off the cover.

Be gentle to avoid breaking the compartment or damaging the camera.

AD

Removing the Old Battery

Once the compartment is open, you'll see the battery. If it's a bit stuck, use your fingernail or a prying tool to gently lift and pull it out.

Never force the battery out, as this could cause damage or a short circuit.

Inserting the New Battery

Now, let's put in the new battery.

AD

Determining the Battery's Polarity

The battery has a positive (+) and negative (-) side. Ensure you match these with theCamera symbols, usually printed on the battery compartment.

Installing the New Battery

Place the new battery into the compartment, matching the polarity with the camera's symbols. Gently push the battery in until it's fully seated.

If your camera uses a cover, replace it and secure it back in place. If it uses a coin, actuate the lever to close the compartment.

Testing the Battery

Finally, let's ensure the new battery is working correctly.

Turning On the Camera

Press the power button to turn on your Blink camera. The camera should power on, and the LED light should illuminate.

If it doesn't, double-check that the battery is installed correctly and that the polarity matches.

Performing a Test Recording

Once you've confirmed the camera is on, perform a test recording. This will ensure that the new battery is functioning correctly and that everything is working as expected.

And there you have it! You've successfully changed the battery in your Blink camera. With a bit of practice, you'll be a pro at this in no time. Happy filming!

AD