how to change the battery in my blink camera

How to Change the Battery in My Blink Camera: A Step-by-Step Guide

By Mark White
AD

Found your Blink camera's battery on the fritz? No worries, replacing it is a straightforward process. Let's guide you through it step by step.

Before you begin, ensure you have a replacement thermostat battery and about 10 minutes for the whole process.

Preparation and Disassembly

The first step is to prepare your Blink camera for the battery change.

AD
How to change the Blink Outdoor Camera batteries
How to change the Blink Outdoor Camera batteries
Blink Camera Battery Problems - Ready To DIY
Blink Camera Battery Problems - Ready To DIY
How To Change The Battery In A Blink Camera
How To Change The Battery In A Blink Camera

Disassembly of the camera involves removing the cover and the old battery.

Unmount the Blink Camera

Begin by unmounting your Blink camera from its wall or tripod mount. Make sure to safety-first and avoid any potential drops!

How to Replace the Batteries in a Blink Camera - HomeCamCafe
How to Replace the Batteries in a Blink Camera - HomeCamCafe
How To Change Blink Camera Battery: Easy Method
How To Change Blink Camera Battery: Easy Method

Once unmounted, you'll have better access to the battery compartment for the upcoming steps.

Remove the Cover

The cover of your Blink camera protects the internal components. To remove it, start by lifting the camera's lens.

AD

Once the lens is lifted, pull the cover away from the camera body. It should slide off easily.

Battery Removal and Replacement

With the cover removed, you'll see the internal components of your Blink camera.

Now, let's move on to removing the old battery and replacing it with a new one.

AD

Remove the Old Battery

The old battery is securely held in place by a small door. To release it, gently push the door towards the battery.

This should cause the battery to pop out slightly. Gently pull it out. Be careful, as the new battery must be aligned correctly.

Insert the New Battery

Your new battery should be aligned with the + sign (anode) facing up and the - sign (cathode) facing down.

AD

Lightly push the battery into the compartment until itclicks into place. The battery should fit snugly and not wobble in any direction.

Reassemble and Test

With the new battery in place, it's time to test it and reassemble your Blink camera.

Replace the Cover

Replacing the cover is just a reversal of the removal process. Align the cover with the camera body and gently slide it back on.

Make sure the cover locks back into place securely, but isn't so tight that it damages the camera.

Mount the Blink Camera

Now that your Blink camera is reassembled, you can mount it back onto its wall or tripod.

Give the camera a few minutes to connect to your Wi-Fi network, and you should be good to go! Make sure to sync it with your Blink app for real-time viewing.

Congratulations, you've successfully changed the battery in your Blink camera! Enjoy your enhanced security with your freshly powered device. If you face any issues, don't hesitate to reach out to Blink's customer support for assistance.

AD