how to make fingerboard ramp

How to Build the Ultimate Fingerboard Ramp

By Mark Brown
AD

Creating a fingerboard ramp might seem daunting at first, but with the right techniques and materials, you can build a durable and functional ramp that will enhance your fingerboarding experience. Whether you're a beginner or an experienced fingerboarder looking to upgrade your setup, this comprehensive guide will walk you through the process of making your own fingerboard ramp. Let's dive right in!

Before we start, let's briefly discuss what a fingerboard ramp is and why you might want one. A fingerboard ramp is a miniature ramp designed specifically for fingerboards, providing a fun and challenging surface to perform tricks and practice techniques. Having your own ramp allows you to improve your skills at your own pace, and it's an excellent addition to any fingerboarding setup.

Choosing Materials and Tools

To create a high-quality fingerboard ramp, you'll need the right materials and tools. Start by gathering the following items:

AD
Mini fingerboard skatepark
Mini fingerboard skatepark
10+ Creative DIY Fingerboard Park Ideas
10+ Creative DIY Fingerboard Park Ideas
skateboard ramps are shown with instructions for them to make it look like they're going down the hill
skateboard ramps are shown with instructions for them to make it look like they're going down the hill

  • Plywood: A lightweight and sturdy material, ideal for building fingerboard ramps. 1/8" or 3mm thick plywood works best for ramps.
  • Skateboard grip tape: Essential for creating a surface with grip, helping your fingerboard maintain traction while performing tricks.
  • Wood glue: A strong adhesive to bond the ramp's layers together.
  • Screws: Use metal screws, preferably panhead or countersunk, to secure the ramp's structure. Stainless steel screws are less likely to rust.
  • Tools: A saw (hand saw or jigsaw), sandpaper or a sanding block (80-120 grit), wood glue, clamps, screwdriver, pencil, ruler, and a scrap piece of wood for a straight edge.

Fingerboard quarter diy
Fingerboard quarter diy
HOW TO BUILD A FINGERBOARD QUARTER PIPE (Tutorial)
HOW TO BUILD A FINGERBOARD QUARTER PIPE (Tutorial)

Designing Your Ramp

When designing your fingerboard ramp, consider factors like height, width, and transition angle. A common height for fingerboard ramps is around 2-3 inches (5-7.6 cm), but you can adjust this based on your preference and skill level. The width should be at least 3 inches (7.6 cm) to provide enough space for tricks and landings. The transition angle can be steep or mellow, depending on the style of fingerboarding you prefer.

You can find numerous fingerboard ramp designs online for inspiration. Once you've chosen a design, create a detailed sketch or use a drawing app to finalize the measurements. Don't forget to consider the overall dimensions of your ramp, including the base and any additional features like coping or extensions.

AD

Cutting the Plywood

Using your design as a reference, cut the plywood pieces using a saw or jigsaw. Be sure to wear safety glasses and follow proper safety guidelines when using power tools. Here are the typical pieces you'll need for a basic quarter pipe ramp:

  • The base: Cut this piece to the desired length and width of your ramp.
  • The ramp face: Cut two identical pieces that will form the ramp's curved surface. These can be traced from a half-circle template or calculated using the formula for a sector of a circle.
  • Support pieces (optional): If desired, cut additional pieces to brace the ramp's structure and add strength.

AD

Assembling the Ramp

With your plywood pieces cut, you're ready to start assembling the fingerboard ramp. Apply wood glue to the edges of the base and carefully align it with one of the ramp face pieces. Use clamps to hold the pieces together while the glue dries. Ensure the ramp face is centered and parallel to the long edges of the base.

Once the glue has dried, position the second ramp face piece and secure it with clamps. The curve of the ramp should face the same direction for both pieces. Allow the glue to dry completely before moving on to the next steps. If you've cut support pieces, attach them using wood glue and screws at this stage to strengthen the ramp's structure.

Sanding the Ramp

After the glue has dried, sand the ramp to remove any rough edges or surfaces. Use sandpaper or a sanding block with an 80-grit to 120-grit sandpaper to create a smooth, even surface. Start with the coarser grit and progress to finer grits for a smooth finish. Be sure to sand both the base and the ramp faces.

AD

Pay special attention to the transition between the base and the ramp faces. This area should be smooth and slightly rounded to provide a seamless surface for your fingerboard to transition over. You can use a scrap piece of wood with a rounded edge to help create this radius.

Applying Grip Tape

Before applying grip tape, clean the ramp's surface to ensure good adhesion. Use a tack cloth or add a small amount of soap to water, wipe the ramp with the solution, and let it dry. This helps remove any dust or residue that could interfere with the grip tape's stickiness.

Carefully cut the grip tape to match the shape and size of the ramp faces. Start by peeling off the backing paper from one edge of the grip tape. Align the exposed edge with the top of the ramp face and press firmly. Work your way slowly and carefully down the ramp, applying steady pressure to ensure the grip tape adheres evenly. Use a ruler or a straight edge to apply even pressure and help eliminate wrinkles or bubbles.

Finishing Touches

With the grip tape applied, your fingerboard ramp is almost complete. There are a few additional steps you can take to enhance the durability and functionality of your ramp:

  • Apply coping (optional): Coping is the top edge of a ramp, typically made from a separate piece of material. It helps protect the ramp's edge and provides a surface to grind tricks. You can create coping from taped griptape, metal, or plastic, and attach it using screws or glue.
  • Add extensions (optional): Build additional features like extensions or ledges to expand the possibilities of tricks and lines you can perform on your ramp. These can be constructed using the same techniques as the main ramp.
  • Paint or stain (optional): Personalize your fingerboard ramp by painting or staining the base and any other exposed wood surfaces. Choose a vibrant color or design to make your ramp stand out.

Testing Your Ramp

Before testing your fingerboard ramp, make sure it's completely dry and any additional features (like coping) are securely attached. Start by riding your fingerboard along the ramp at a slow speed, gradually building up to faster and more complicated tricks as you become more comfortable with the ramp's feel.

Be on the lookout for any imperfections or weak points in the ramp's construction, and make any necessary adjustments. Over time, you can experiment with different techniques and skill lines to push the limits of your custom-built fingerboard ramp.

Building your own fingerboard ramp is an excellent way to improve your fingerboarding skills and create a unique addition to your setup. With the techniques and tips outlined in this guide, you can craft a durable and functional ramp that will provide endless fun and challenge. So get started, and happy fingerboarding!

AD