how to make fingerboard ramps

How to Make Epic Fingerboard Ramps: The Ultimate DIY Guide

By Anthony Lee
AD

Ever wondered how to take your fingerboarding skills to the next level? Crafting your own fingerboard ramps can significantly enhance your setup, offering unique challenges and opportunities to improve. This comprehensive guide will walk you through the process, from planning to construction, ensuring you're well-equipped to create your own fingerboarding paradise. Let's dive right in!

Before we start, knowing your way around some basic tools is essential. You'll need a jigsaw, sandpaper, a ruler, a pencil, clamps, and wood glue. Patience and precision are also crucial, so let's not rush into things. Now, let's plan our masterpiece.

Design and Planning

First, decide on the size and shape of your ramp. Fingerboard ramps typically range from 6" to 12" wide and 10" to 24" long. Consider your space constraints and personal preferences. Sketch out your design, including kinks, jumps, or ledges, and choose your preferred wood type. Plywood or MDF works well for their durability and affordability.

AD
Mini fingerboard skatepark
Mini fingerboard skatepark
D.I.Y Fingerboard Park in 1 Day Challenge!
D.I.Y Fingerboard Park in 1 Day Challenge!
10+ Creative DIY Fingerboard Park Ideas
10+ Creative DIY Fingerboard Park Ideas

Once you're happy with your design, transfer it onto your chosen wood using your sketch as a guide. Remember, every line matters, as these will be the blueprint for your creation.

Cutting Your Ramp Shape

Break out your jigsaw and follow your guidelines to cut along the outer edges of your design. Be patient and steady to ensure a smooth, accurate cut. If you're new to jigsaws, practice on some scrap wood first to get a feel for the tool.

D.I.Y Cardboard Fingerboard Skate Park
D.I.Y Cardboard Fingerboard Skate Park
DIY Cardboard Fingerboard Ramp!!
DIY Cardboard Fingerboard Ramp!!

For internal cuts, like those for kinks or jumps, use a sharp pen or pencil to carefully poke holes along your cutting lines. Then, connect the dots with your jigsaw to cut out these intricate shapes.

Sand for Smoothness

After cutting, use sandpaper (start with 120-grit, then progress to 220-grit) to smooth out any rough edges or surfaces. Sand with the grain of the wood for a consistent, professional finish. Remember, safety first - wear appropriate eye and lung protection.

AD

Test the ramp's functionality with your fingerboard as you go. This stage is crucial for identifying and rectifying any design flaws before attaching the sections together.

Assembly and Staining

Now that you're satisfied with your ramp's individual components, it's time to glue and clamp them together. Apply wood glue evenly along the edges of each piece, then carefully align them and secure with clamps. Ensure they're level and aligned properly before leaving them to dry for at least 24 hours.

Once dry, remove the clamps and sand any excess glue from the seams. If your ramp needs additional support, now is the time to consider bolting or screwing the sections together. Remember, fingerboarding puts a lot of pressure on these joints, so don't skimp on reinforcement.

AD

Staining for Aesthetics

While not essential, staining your ramp adds a touch of professionalism and helps protect the wood from wear and tear. Choose a color that complements your setup and, using a brush or rag, apply the stain evenly across the ramp. Allow it to soak in for the recommended time, then wipe off any excess.

After staining, let your ramp dry completely before applying a clear sealant like polyurethane or varnish. This protects your ramp from moisture, dirt, and scratches.

Final Touches

The last step is adding any desired features, such as griptape or decals. Measure and cut griptape to fit any areas where you want extra traction, then apply and smooth out any bubbles or creases. For decals, carefully position them where you want, then use a credit card to smooth out any edges.

AD

Your custom fingerboard ramp is now complete! Show it off, practice your tricks, and enjoy the fruits of your labor. Building your own equipment not only enhances your fingerboarding setup but also hones your DIY skills. So go forth, create, and most importantly, have fun! Happy fingerboarding!

AD