how to light pilot light on goodman furnace

How to Light the Pilot Light on Your Goodman Furnace

By Anthony Johnson
AD

Has your Goodman furnace stopped blowing warm air? The Pilot light could be the culprit. Don't worry; it's a common issue, and resetting the pilot light is a simple fix. Let's guide you through the process step-by-step. Before you start, ensure you have a lighter on hand and know how to shut off the furnace's gas supply.

Goodman furnaces have safety features designed to automatically shut off the gas supply when the pilot light goes out. However, occasionally, the pilot light might not reignite on its own. Here's how to light the pilot light on your Goodman furnace.

Understanding Your Goodman Furnace's Pilot Light

The pilot light in your Goodman furnace is a small flame that burns constantly, igniting the burner when your thermostat calls for heat. Understanding its location and how it works is crucial for troubleshooting pilot light issues.

AD
Lighting Furnace Pilot: How to Light the Pilot Light on a Furnace
Lighting Furnace Pilot: How to Light the Pilot Light on a Furnace
How To Relight A Pilot Light On A Propane Furnace
How To Relight A Pilot Light On A Propane Furnace
How To Relight Furnace Pilot Light?
How To Relight Furnace Pilot Light?

In most Goodman furnaces, the pilot light is located at the burner assembly. It's a small blue flame that should be burning continuously when the furnace is in its 'ON' position. If the flame is out or yellow instead of blue, it's an indication that there's a problem that needs your attention.

Safety First: Preparing to Light the Pilot Light

Before starting, turn the furnace off at the thermostat and shut off the gas supply valve located on the gas pipe leading to your furnace. This is a safety precaution to prevent gas leaks. Wait for at least 15-20 minutes to allow any escaped gas to dissipate.

How To Light A Pilot Light On An Old Furnace - Hunker
How To Light A Pilot Light On An Old Furnace - Hunker
Furnace Pilot Light Keeps Going Out – What To Do?
Furnace Pilot Light Keeps Going Out – What To Do?

Next, find the pilot light assembly on your Goodman furnace. It's usually located near the bottom, and you should see a label or sticker indicating 'Pilot' or 'Pilot Light'. Have your lighter ready and ensure it's functional.

Locating the Pilot Light Reset Button

Now that you've confirmed the gas is off and you've allowed time for any gas to dissipate, it's time to find the reset button. This button, also called the pilot light reset switch, is usually color-coded red and is typically labeled 'Pilot'. It may be located near or on the pilot light assembly.

AD

Press and hold the reset button for approximately 30 to 60 seconds. This should release any gas trapped in the pilot light assembly, preparing the system to light the pilot. If you're not sure where the reset button is, refer to your furnace's owner's manual. If you can't find it, consider calling a licensed HVAC technician.

Lighting the Pilot Light

With the reset button held down, use your lighter to light the pilot light. You should hear the gas igniting and see a small blue flame appear. Keep holding the reset button for another 10-15 seconds to ensure the pilot light stays lit.

Once the pilot light is lit, release the reset button slowly. If the flame goes out immediately, you might have a draft or the pilot light orifice is clogged. If this happens, allow the furnace to sit for another 5-10 minutes, then try relighting the pilot light. If the light stays on, you've successfully relit the pilot light on your Goodman furnace.

AD

Reactivating the Furnace

Before turning your furnace back on, ensure the pilot light is burning constantly and steadily. If it's still out or flickering, you might have an issue with the thermocouple, pilot light orifice, or gas supply. In this case, it's best to call a professional for help.

Once the pilot light is burning steadily, slowly turn the gas supply valve back to the 'ON' position. After a few minutes, turn your furnace back on at the thermostat. Your furnace should now be blowing warm air again.

If you've tried multiple times to light the pilot light and it still won't stay lit, or if you smell gas at any point during this process, do not attempt to fix the problem yourself. Instead, turn off the gas supply valve, contact your gas company, and hire a licensed HVAC technician to assess and fix the problem safely.

AD

Regular maintenance can prevent pilot light issues and other common furnace problems. If you're not comfortable performing this task yourself, consider hiring a professional HVAC service to inspect and maintain your Goodman furnace annually. Stay warm and safe this winter!

AD