how to light a dyna glo kerosene heater

How to Light a Dyna-Glo Kerosene Heater: A Step-by-Step Guide

By Robert Davis
AD

Kerosene heaters, like the Dyna-Glo brand, provide a cozy, efficient, and economical alternative to traditional electric or gas heating. If you're new to kerosene heaters, learning how to light a Dyna-Glo kerosene heater is a straightforward process. This guide will walk you through the steps, ensuring your heater is ready to warm your space in no time.

Before we begin, always prioritize safety. Ensure the heater is in a well-ventilated area, away from flammable materials, and never leave it unattended while in use. Now, let's dive into the simple steps to light your Dyna-Glo kerosene heater.

Preparing Your Dyna-Glo Kerosene Heater

Before lighting, it's crucial to prepare your heater for safe and efficient operation.

AD
How to Light a Dyna-Glo Gas Heater | 10 Methods you need follow
How to Light a Dyna-Glo Gas Heater | 10 Methods you need follow
Your Dyna Glo Propane Heater Won’t Light? Why? What To Do?
Your Dyna Glo Propane Heater Won’t Light? Why? What To Do?
Stay Warm This Winter With a Powerful Kerosene Heater! | Dyna-Glo 23,800 BTU
Stay Warm This Winter With a Powerful Kerosene Heater! | Dyna-Glo 23,800 BTU

First, ensure the heater is clean and free of debris. Use a soft cloth or brush to remove any dust or residue from the wick, burner, and glass chimney. A clean heater ensures optimal fuel combustion and longevity.

Choosing the Right Kerosene

Always use clean, Jeromedehyde-free K-1 kerosene in your Dyna-Glo heater. This type of kerosene burns cleaner and safer than other fuels, reducing the risk of emissions and residues. Never use gasoline, diesel, or any other fuel, as they pose fire and safety hazards.

How to Changing the wick on a kerosene heater. Watch full video before you try .
How to Changing the wick on a kerosene heater. Watch full video before you try .
How to light a kerosene heater
How to light a kerosene heater

Check your heater's fuel tank; if it's empty or low, fill it to the recommended level. Be sure not to overfill, as excess fuel can cause leaks and safety issues.

Priming the Wick

Before lighting, you'll need to prime the wick to ensure it's saturated with kerosene. This step is crucial for a smooth ignition and consistent heat.

AD

Locate the wick in the bottom of the heater, and use the wick-raising mechanism to pull it up about one inch (2.5 cm). Allow the wick to soak in kerosene for about 10-15 minutes. This step ensures the wick is properly primed and ready to light.

Lighting Your Dyna-Glo Kerosene Heater

Now that your heater is prepared, it's time to light it. Follow these steps for a safe and successful ignition:

First, gently pull the starting handle up to the full open position. This allows oxygen to feed the wick, facilitating ignition.

AD

Using the Pilot Light

The pilot light system on your Dyna-Glo heater provides a consistent, low-level flame that keeps your heater lit even if the power goes out. To use the pilot light:

Press down and hold the pilot flame button on the control knob for about 30 seconds to create pressure in the fuel line. While still holding the button, turn the control knob to the "pilot" position. Release the button, and you should see a small flame at the wick's tip.

Igniting the Main Burner

With the pilot light burning steadily, it's time to light the main burner. Turn the control knob to the "on" position, allowing the wick to extend into the combustion chamber. The pilot light will ignite the main burner, and you should see a consistent, even flame.

AD

Allow the heater to warm up for several minutes before adjusting the thermostat or control knob to your desired setting. Remember to keep the heater at a safe distance from walls, furniture, and other flammable materials.

Maintaining and Extinguishing Your Dyna-Glo Heater

Regular maintenance ensures your Dyna-Glo heater operates efficiently and safely. Always allow the heater to cool completely before performing maintenance tasks, refueling, or moving the unit.

To extinguish the heater, turn the control knob to the "off" position, lowering the wick below the burner. Allow the heater to cool completely before storing it in a dry, well-ventilated area.

Cleaning and Storing Your Heater

Before storing your Dyna-Glo heater, clean it thoroughly to remove any fuel residue or emissions. Use a soft cloth or brush to clean the wick, burner, and glass chimney. Store the heater in a cool, dry place, away from direct sunlight and any potential heat sources.

By following these steps and maintaining your Dyna-Glo kerosene heater, you'll enjoy consistent, efficient heating during colder months. Always prioritize safety, and never hesitate to consult the user manual for specific instructions tailored to your heater model.

Now that you're equipped with the knowledge to safely light and maintain your Dyna-Glo kerosene heater, embrace the warmth and comfort it brings to your space. Keep the heater in peak condition, and it will serve you well for many winters to come.

AD