how to jump start a 2018 jeep compass

How to Jump Start a 2018 Jeep Compass

By Thomas Young
AD

Ever found yourself in a bind, standing beside your beloved 2018 Jeep Compass, only to realize its battery's as lifeless as a rock? Fret not, for help is at hand. In this comprehensive guide, we'll walk you through the process of jump-starting your Jeep Compass, ensuring you're back on the road in no time. Remember, safety first, so always follow these steps meticulously.

Before we dive in, ensure you have a set of jumper cables and a willing bystander with a functional vehicle. Also, make sure both vehicles are off and the ignition is in the 'Off' position throughout the process.

Understanding Your Jeep Compass Battery

The 2018 Jeep Compass uses a 12-volt battery, quite standard for most cars. Knowing your battery's type and voltage helps in choosing the right jumper cables and ensuring you're jump-starting it correctly.

AD
How to Jump Start 2018 Jeep Compass: Essential Tips and Tools - Ran When Parked
How to Jump Start 2018 Jeep Compass: Essential Tips and Tools - Ran When Parked
16 Hidden Jeep Compass SUV Features Every Owner Should Know About
16 Hidden Jeep Compass SUV Features Every Owner Should Know About
Suburban Offroading in the 2018 Jeep Compass Trailhawk
Suburban Offroading in the 2018 Jeep Compass Trailhawk

Now, let's discuss the types of batteries. The most common are Flooded Lead-Acid and Absorbed Glass Mat (AGM) batteries. The latter is typically found in newer vehicles due to its superior performance and safety. Your 2018 Jeep Compass might use either, so it's essential to know your battery's type before jump-starting.

Preparing for the Jump-Start

First, park the functional vehicle near your Jeep Compass, nose-to-nose or side-by-side. This ensures the jumper cables can reach both vehicles' batteries. Engage the parking brake on both vehicles to prevent any unwanted movement.

2018 Jeep Compass - How To Check Coolant Level In
2018 Jeep Compass - How To Check Coolant Level In
How to start your Jeep/Chrysler if your key fob dies.
How to start your Jeep/Chrysler if your key fob dies.

Next, locate the battery in your Jeep Compass. It's typically found under the hood, secured by a retaining strap, and might be covered by a plastic plug. Remove the plug and unscrew the retaining strap to access the battery terminals. Be cautious not to let the tools fall onto the battery or terminals.

Connecting the Jumper Cables

Connect the jumper cables in the correct sequence. Start by connecting one red clamp to the positive (+) terminal of the dead battery. Ensure it's tightly secured. Then, connect the other red clamp to the positive (+) terminal of the functional vehicle's battery.

AD

Now, connect one black clamp to the negative (-) terminal of the functional vehicle's battery. The other black clamp should be connected to an unpainted metal surface on your Jeep Compass, away from the battery and the engine, like a bolt on the engine block. This serves as a ground.

Reviving Your Jeep Compass

Start the functional vehicle and let it run for a couple of minutes. This gives the battery enough time to provide a charge to your Jeep Compass. After the wait, try starting your Jeep Compass. If it cranks but doesn't start, give it a little more time charged from the functional vehicle's battery.

Once Your Jeep Compass is Running

Turn off both engines. Disconnect the jumper cables in the reverse order you connected them: first the black clamps, then the red clamps. Re-check the battery terminals on your Jeep Compass to ensure no parts left are connected that could cause a short.

AD

Let your Jeep Compass run for a few minutes to allow the alternator to charge the battery. Once done, you're good to go! However, keep in mind that jump-starting wears out your battery faster, so consider visiting a mechanic to have it checked.

So there you have it, a comprehensive guide on jump-starting your 2018 Jeep Compass. Remember, stay calm, follow these steps cautiously, and you'll be back on the road in no time. Happy driving!

AD