how to jump a harley battery

"How to Jump Start a Harley Battery"

By Robert Jones
AD

Ever found yourself stuckщ alguns blocks away from your destination, only to realize your Harley's battery has given up the ghost? Don't let this common predicament leave you stranded. We're here to guide you through jump-starting your Harley's battery like a pro.

First, let's understand that Harley Davidson motorcycles have unique electrical systems. They're designed to minimize the potential for electrical shorts, but this also makes them a bit more complex to jump-start. Fear not, though. With the right knowledge and a disciplined approach, anyone can safely jump-start a Harley battery.

Safety First: Preparing to Jump-Start Your Harley

before you dive into the process, safety should be your top priority. You'll be handling electrical components and electricity is no joke. Ensure your gloves and safety glasses are on, and remember, never attempt to jump-start if your battery is swollen or leaking.

AD
How to Jump a Battery and Get Yourself Back on the Road
How to Jump a Battery and Get Yourself Back on the Road
How to Recondition A Dead Motorcycle Battery
How to Recondition A Dead Motorcycle Battery
How to Maintain your Motorcycle Battery - J&P Cycles Tech Tip
How to Maintain your Motorcycle Battery - J&P Cycles Tech Tip

Next, gather your tools. You'll need a jumper cable, a compatible vehicle with a healthy battery (preferably another Harley), and a dose of patience. Now, let's dive right in.

Pre-Jump Check: Understanding Your Harley's Battery

Harley Davidson batteries are 12V, but unlike cars, they come with unique twist-lock connectors. These are designed to prevent accidental shorts. Familiarize yourself with them - the positive terminal has a red cap, and the negative, black. Both have corresponding colored connectors on the cables.

How To Revive A Dead Motorcycle Battery?
How To Revive A Dead Motorcycle Battery?
Battery Betrayal! How to AVOID Getting Stranded with a Dead Motorcycle Battery
Battery Betrayal! How to AVOID Getting Stranded with a Dead Motorcycle Battery

Also, Harley batteries are not your typical flooded lead-acid type. They're sealed, maintenance-free batteries. Don't confuse them with GEL or AGM batteries, as they have different jumping procedures. Understanding your battery type is crucial before attempting any procedure.

Jumper Cable Connection: How to Hook Up Correctly

First, connect the positive cable to the positive battery terminal on both motorcycles. Ensure the clamps are securely fastened and avoid touching any other metal parts when doing this. Next, connect the negative clamp to the negative battery terminal of the donor bike.

AD

A common mistake is connecting the remaining negative clamp directly to the dead battery. Instead, connect it to an unpainted metal surface on the Harley, away from the battery and air filter. This method is safer and more effective.

A Step-by-Step Guide to Jump-Starting Your Harley

Once you've connected the jumper cables correctly, it's time to fire up the donor bike. Start the bike and let it idle for a few minutes to give the dead battery a good charge. Keep an eye on the indicator light on the donor bike's dashboard. If it goes out, your Harley's battery is receiving a charge.

Now, gently try to start your Harley. If it turns over but doesn't start, give it a few more seconds. If it still doesn't start, wait a few minutes, then try again. Never try to start a Harley more than three times in succession without letting the battery rest.

AD

Post-Jump: Revving and Riding

Once your Harley roars back to life, let it idle for a few minutes to allow the battery to build up a good charge. Then, rev the engine a couple of times to further boost the battery. This helps maximize the battery's charge and improves its long-term life.

After revving, remove the jumper cables in reverse order of how you connected them. Finally, ride your Harley gently for the first 15-20 minutes to ensure the battery holds its charge. If it dies again, you might need to replace the battery.

Last Resort: When Jump-Starting Doesn't Work

If your Harley still refuses to start after a few attempts, it might be time to consider other issues. It could be a faulty starter, a blown fuse, or a wiring problem. If you're not confident in diagnosing these issues, it's best to consult a professional mechanic.

AD

Lastly, always carry jumper cables with you. Prevention is better than cure, and having the right tools can save you from potential strife on the road.

There you have it! With these steps, you're well on your way to mastering how to jump-start a Harley battery. Remember, always prioritize safety, understand your battery, and be patient with the process. Happy riding!

AD