how to install valance over blinds

how_to بالضرورة.

By Christopher Allen
AD

Adding a valance over your existing blinds is a simple and effective way to enhance the aesthetic appeal of your windows while providing additional privacy. Whether you're aiming for a more luxurious look or just adding a touch of coziness, installing a valance over your blinds is a DIY project that requires minimal effort and time.

Before we dive into the step-by-step process, it's crucial to understand that there are two types of valances you can choose from - stationary and traverse. Stationary valances are fixed in place and don't move, while traverse valances can be pulled up or down to cover or uncover the window. Today, we'll focus on installing a stationary valance over your blinds, as the process is relatively straightforward and requires fewer steps.

Preparation: Gather Your Tools and Materials

Before embarking on this project, ensure you have all the necessary tools and materials. You'll typically need:

AD
the before and after pictures of an open window
the before and after pictures of an open window
Easy No-Hardware Valance for Blinds
Easy No-Hardware Valance for Blinds
6 Great Valance Ideas That Work with Blinds
6 Great Valance Ideas That Work with Blinds
  • Tape measure
  • Pencil
  • Hammer
  • Brim finish or wall nailer
  • Finishing nails (1 to 1.5 inches long)
  • Valance hardware kit
  • Valance
  • Drill (if your hardware kit requires it)

Measure Your Window and Valance

Measure the width of your window from one side of the blind to the other, making sure to account for any mounting hardware that may be present. This dimension will help you determine the ideal length for your valance. Remember, the valance should be slightly longer than your window to cover the blind evenly on both sides.

Next, measure the height of your window to determine how long you'll need to cut the valance bracket. The bracket should be long enough to accommodate the height of your window and the thickness of the valance. Typically, you'll want to cut the bracket to be roughly 1.5 to 2 inches longer than the height of your window.

How to Measure and Install Valance Clips on Horizontal Blinds
How to Measure and Install Valance Clips on Horizontal Blinds

Install the Bracket

With your measurements in hand, it's time to install the bracket that will support your valance. If your window frame is made of wood, you can use a brad nailer or a hammer and finishing nails to secure the bracket in place. If your window frame is made of metal or vinyl, you may need to use a drill to create pilot holes before securing the bracket with scre ws provided in your hardware kit.

Position the bracket on the wall, making sure it is level and centered. Statue the bracket in place using the recommended method for your window frame material. Be sure to leave enough space at the top of the bracket to allow the valance to fit snugly.

AD

Installing the Valance

Now that your bracket is securely in place, it's time to install the valance itself. If your valance hardware kit includes a wooden valance, you'll need to attach it to the bracket using the provided screws or brad nails. If your valance is made of fabric, you'll first need to attach the valance board to the fabric before securing it to the bracket.

Attaching the Valance Board to the Fabric

Begin by cutting your valance board to match the width and depth of your valance. Most valances are designed to have a 1-inch overlap on either side of the window, so keep this in mind when making your cuts.

Next, attach the valance board to the fabric using a sturdy craft glue or by stapling it to the board. If you're using glue, apply a generous amount along the top edge of the valance board, and then carefully attach the fabric, smoothing out any wrinkles as you go. If you're using staples, fold the fabric over the top edge of the valance board, and then secure it in place with staples along the bottom edge. Make sure to space your staples no more than 2 inches apart.

AD

Securing the Valance to the Bracket

With your valance board securely attached to the fabric, it's time to install it on the bracket. If the bracket is designed with a lip or a channel to accommodate the valance board, simply slide the valance board into place until it's fully seated. If the bracket doesn't have a lip or channel, you'll need to secure the valance board to the bracket using screws or brad nails.

Once the valance is securely in place, stand back and admire your handiwork. You've now added a stylish and functional addition to your window that will enhance the overall appearance of your room while providing additional privacy and light control.

Remember, installing a valance over your blinds can be a simple and rewarding DIY project that adds a touch of elegance to your windows. With a little planning and the right tools, you can achieve professional-looking results that will complement your overall decor. Happy valancing!

AD
AD