how to install odl add on blinds

Install ODL Add-On Blinds: Step-by-Step Guide

By John Johnson
AD

Transform your window space with the modern elegance of ODL add-on blinds. Installing these innovative window coverings can enhance both privacy and light control in your home. Below, we guide you through a step-by-step process of how to install ODL add-on blinds, ensuring a seamless and precise installation.

Before you begin, gather your tools - a measuring tape, a pencil, a screwdriver, and the installation hardware provided with your blinds. You'll also need to determine the type of window you have, as installation differs slightly between double hung, casement, and slider windows.

Measuring and Preparing Your Windows

Accurate measurement is crucial for a perfect fit. Here's how to measure your windows:

AD
How to Install ODL Add On Blinds on Raised Frame Doors
How to Install ODL Add On Blinds on Raised Frame Doors
Add-On Blinds for Doors - ODL
Add-On Blinds for Doors - ODL
Easy DIY: How to Install ODL Add on Blinds for Doors - One Handy Momma
Easy DIY: How to Install ODL Add on Blinds for Doors - One Handy Momma

For inside mounted blinds, measure the width at the top, middle, and bottom of the window frame, and then subtract 1/4" from the narrowest measurement. For height, measure from the top of the frame to the bottom, and then subtract 3/4".

Measuring for Double Hung Windows

Measure the width at the top of the top sash and subtract 3/4". For height, lower the top sash to the bottom and measure from the top of the top sash to the bottom of the bottom sash, then subtract 1".

How to Install ODL Add-On Blinds for Raised Frame Doors
How to Install ODL Add-On Blinds for Raised Frame Doors
How to Install Window Blinds
How to Install Window Blinds

Measuring for Casement and Slider Windows

For casement windows, measure the height at the hinged side. For sliders, measure the height on the side where the window slides. In both cases, subtract 1" from the height measurement.

Installing the Head Rail Mounting Bracket

Once measured and prepared, it's time to install the head rail mounting bracket. Follow these steps carefully:

AD

Position the bracket on the top of the window frame, ensuring it's level and centered. Mark the screw holes with a pencil, then remove the bracket.

Drilling Pilot Holes

Using a drill, create pilot holes at your marked screw holes. For vinyl or hollow metal frames, use a smaller drill bit to prevent stripping the frame.

Securing the Head Rail Bracket

Position the head rail bracket back on the window frame, aligning the screw holes with the pilot holes. Secure the bracket using the provided screws, ensuring it's firmly attached to the frame.

AD

Installing the Blind Carrier and Wand Control

Next, install the blind carrier and wand control for easy operation of your blinds.

Slide the blind carrier onto the head rail, ensuring the wand control is facing the correct direction for your window.

Aligning the Blind Carrier

Slide the blind carrier until it's centered over the window opening. Ensure the cord or wand control is easily accessible.

AD

Securing the Blind Carrier

Once aligned, lock the blind carrier into place using the set screws on the ends of the head rail. This prevents the blind carrier from shifting during operation.

Mounting the Blinds and Adjusting the cords

Finally, mount your blinds onto the carrier and adjust the cords for optimal functionality.

Lower the blind slats from the head rail, ensuring they're fully extended. Attach the blind to the carrier by aligning the blind brackets with the carrier's mounting holes and securing them with screws.

Adjusting the Cord Tensions

Tension the lift cords by pulling the blind all the way up and down, then adjusting the cord locks to maintain the blind's position. Adjust the tilt cord so the slats can be easily maneuvered.

Congratulations! You've successfully installed your ODL add-on blinds. Enjoy the flexibility and control these innovative window coverings offer. Now that you're familiar with the process, consider upgrading other windows in your home for a cohesive, modern look. Happy window transforming!"

AD