how to install urinal flush valve

How to Install a Urinal Flush Valve: A Step-by-Step Guide

By Nicole Allen
AD

So, you've decided to replace or upgrade the flush valve on your urinal? You've come to the right place! This comprehensive guide will walk you through the process step-by-step, ensuring you get the job done right. By the end of this article, you'll have a professional, efficient urinal that meets your needs and exceeds your expectations. Let's dive in!

Before we start, let's ensure you've gathered all the necessary tools and materials. You'll need a new flush valve, a screwdriver (usually Philips or flathead), an adjustable wrench, a towel, and some plumber's putty or Teflon tape. Now that everything's ready, let's get our hands dirty!

Preparing the Work Area

First things first, you'll want to cut off the water supply to the urinal. Look behind it, find the shut-off valve, and turn it clockwise till it stops. If there's no valve, you might need to turn off the main water supply to your home.

AD
How to Install a Toto Urinal | ehow.com
How to Install a Toto Urinal | ehow.com
Duravit DuraSystem 1150mm Urinal Frame For Concealed Flushing Valve
Duravit DuraSystem 1150mm Urinal Frame For Concealed Flushing Valve
Fix Sloan Regal & Royal Flush Valves
Fix Sloan Regal & Royal Flush Valves

Next, place a towel over the drain to catch any debris or parts that may fall during the removal process. This will save you from a messy cleanup later on.

Removing the Old Flush Valve

Start by opening the urinal's access panel. It's usually located behind the flush handle or under a decorative cover. Once exposed, remove the bolts securing the flush handle to the wall using your screwdriver.

Sloan Regal Flushometer | Installation | Repair and Replace
Sloan Regal Flushometer | Installation | Repair and Replace
Smartflush - The Intelligent Urinal Flush Control for Commercial Washrooms
Smartflush - The Intelligent Urinal Flush Control for Commercial Washrooms

Now, reach behind the urinal and locate the flush valve. There should be a nut securing it to the urinal's water supply line. Using your adjustable wrench, turn the nut counterclockwise to loosen and remove it. Be careful not to damage the water supply line.

Preparing the New Flush Valve

Before installing the new flush valve, ensure it's compatible with your urinal's make and model. The most common types are diaphragm and float-equipped flush valves. Once you've verified its compatibility, it's time to prepare it for installation.

AD

If the new flush valve comes with a mounted gasket, you're in luck. If not, you'll need to apply a thin layer of plumber's putty or wrap the joint with Teflon tape to create a watertight seal. Be sure not to overdo it, as too much putty or tape can prevent a proper seal.

Installing the New Flush Valve

Now that your old flush valve is removed, and your new one is prepared, it's time to install the replacement.

First, position the new flush valve against the urinal's water supply inlet. Ensure the gasket or putty-covered joint aligns perfectly with the inlet.

AD

Securing the New Flush Valve

Slowly and carefully push the new flush valve into the urinal's water supply inlet while rotating it gently. This should help create a tight seal. Once the valve is securely in place, hold it firmly and hand-tighten the nut that secures it to the water supply line.

Now, reach behind the urinal and reattach the flush handle. Ensure it aligns correctly with the flush rod and secure it using the screws you removed earlier.

Testing the New Flush Valve

Before turning the water supply back on, give the new flush valve a quick test. Lift the flush handle and release it. The water should flow smoothly and flush the urinal completely.

AD

If the flush is strong and effective, it's time to turn the water supply back on. Slowly turn the shut-off valve counterclockwise until water flows from the urinal. Monitor the new flush valve for any leaks, and if everything seems in order, you've successfully installed a new flush valve!

Congratulations on a job well done! You've successfully installed a new flush valve on your urinal. Now sit back, relax, and enjoy a functioning, efficient urinal. If you ever encounter any issues or have questions in the future, don't hesitate to refer back to this guide or seek professional advice. Until next time, happy DIYing!

AD