Step-by-Step Guide: How to Install an Upflush Toilet
Installing an upflush toilet in a space where traditional plumbing isn't possible or practical is a rewarding DIY task. This innovative toilet system pumps waste up and out to your existing plumbing. This guide will walk you through the process, ensuring a successful and efficient installation.
Before you begin, gather all necessary tools: a jigsaw, reciprocating saw, level, trowel, caulking gun, adjustable wrench, screwdriver, bucket, gloves, and safety glasses. You'll also need the upflush toilet kit, including the macerator pump, pipes, and fittings.
Prepare the Installation Area
The first step is to clear and prepare the installation area. Remove any existing flooring or cabinetry to create a level, open work space. Use a reciprocating saw to cut through any subfloor to access the plumbing space below.
Measure and mark the location of the toilet and the macerator pump. The macerator must be placed at least 12 inches from the toilet and 18 inches from any wall to allow for service access. Use a level to ensure both the toilet and pump will be level once installed.
Install the Toilet
Assemble the upflush toilet according to the manufacturer's instructions. Unlike traditional toilets, the upflush toilet doesn't require a wax ring or bolts. It's designed to be secured to the floor using brackets and screws. Ensure the toilet is level and securely fastened to the floor.
Next, connect the toilet's waste outlet to the macerator pump inlet using a 3-inch PVC pipe and a push-fit coupling. Ensure this connection is secure to prevent leaks.
Install the Macerator Pump
The macerator pump is the heart of the upflush toilet system. It grinds up solid waste and toilet paper into a slurry, which it pumps up and out to your existing plumbing. Install the macerator pump in the location you've marked, securing it to the floor using its mounting bracket.
Connect the pump outlet to your existing waste pipe using an adapter and coupling. This is typically a 4-inch PVC pipe. Ensure the adapter is the correct size to fit both your pump outlet and the existing pipe. Use Teflon tape to create a watertight seal.
Connect the Water Supply
Upflush toilets require a water supply just like traditional toilets. They typically use a sealed, double-ball float fill valve to ensure efficient water usage. Connect your water supply line to the fill valve inlet using a 3/8-inch reinforced hose.
Route the water supply line through the wall or floor, ensuring it's supported and won't kink. Connect it to your water supply using a compression fitting and an adjustable wrench. Turn on the water main to test the supply line for leaks.
Install the Vent
Upflush toilets also require a vent to release sewer gases and allow for proper operation of the macerator pump. The vent can be run through the roof, wall, or floor, depending on your plumbing configuration. Use 2-inch ABS or PVC pipe for the vent.
Connect the vent to the pump outlet using an elbow and a Y-fitting. Ensure the vent extends at least 5 feet above the roof or 12 inches above the ground if venting through the floor. This prevents sewer gases from re-entering your home.
Install the Float and Fill Valve
Install the float and fill valve in the tank according to the manufacturer's instructions. The float controls the water level in the tank, refilling it after each flush. The fill valve ensures that water flows into the tank at the correct pressure and rate.
Connect the fill valve to the water supply line. Test the flush mechanism by holding down the flush handle. The tank should refill with water and the macerator pump should activate.
Congratulations, you've successfully installed an upflush toilet! Regularly clean your macerator pump and check all connections for leaks to ensure the longevity of your new toilet. With proper maintenance, your upflush toilet should provide trouble-free service for many years to come.