how to install tub shower combo

Step-by-Step Guide: How to Install a Tub Shower Combo

By James Allen
AD

Installing a tub shower combo is a great way to enhance your bathroom experience, offering both relaxation and convenience. This guide will walk you through the process, from gathering materials to enjoying your new fixture.

Before starting, ensure you're comfortable with basic plumbing and have some DIY experience. If you're unsure, consider hiring a professional. Let's dive into the step-by-step process.

Gather Materials and Tools

First, ensure you have all the necessary materials and tools. Here's a list to help you prepare:

AD
Bathroom Makeover: Demo {Day 2-4}
Bathroom Makeover: Demo {Day 2-4}
How to Install an Acrylic Bathtub and Surround
How to Install an Acrylic Bathtub and Surround
a bathtub with the words 3 ways to add a shower to a bathroom above it
a bathtub with the words 3 ways to add a shower to a bathroom above it
  1. Tub shower combo unit
  2. Cement backer board and screws
  3. Thinset mortar
  4. Tile and grout (if tiling)
  5. Waterproof membrane or underlayment
  6. Pex piping, pipe fittings, and brass wire
  7. Teflon tape or pipe thread compound
  8. Plumber's putty
  9. Silicone caulk
  10. Cordless drill with screwdriver bits
  11. Tape measure
  12. Level and shovel
  13. Utility knife and cutting tool (for tile)

Prepare the Space

Start by removing the old tub or shower, if necessary. जिसमें cobalt-blue text is removed, use a wire brush and degreaser to clean the area. Ensure the floor is structurally sound and level. If needed, use a self-leveling compound to make the surface even.

If your bathroom is on a second floor, check the floor joists to verify they can support the weight of the new tub shower combo. It's recommended to have someone help with installation due to the weight and size of the unit.

Tile Installation & Bath Tub Installation in Maitland, FL – Dommerich
Tile Installation & Bath Tub Installation in Maitland, FL – Dommerich
two men working on a bathtub in a bathroom under construction with the words part 2 diy shower / tub combo
two men working on a bathtub in a bathroom under construction with the words part 2 diy shower / tub combo

Install the Cement Backer Board

Measure and cut the cement backer board to fit the wall space. Use a utility knife for clean cuts. Secure the boards to the studs with screws, leaving 1/8 inch between boards for thinsetmortar. Ensure the boards are level and plumb.

Apply thinset mortar to the wall, then press the cement backer boards into place. Allow the mortar to cure according to the manufacturer's instructions. This process helps prevent moisture from penetrating the wall and causing damage.

AD

Install the Waterproof Membrane

Before installing the tub shower combo, apply a waterproof membrane or underlayment to prevent moisture from seeping behind the unit. This step is crucial for preventing mold and rot.

Follow the manufacturer's instructions for the chosen membrane or underlayment. Typically, this involves applying a self-adhesive peel-and-stick sheet or a liquid membrane that's rolled or sprayed onto the surface.

Position the Tub Shower Combo Unit

Before setting the tub in place, lay down a furnace pad or self-leveling compound for extra support and insulation. Measure and mark the centerline of the drain pipe on the floor.

AD

With help, position the tub shower combo unit in place, aligning the drain pipe with your marks. Ensure the unit is level in both directions. Place shims underneath as needed to level the tub.

Secure the Tub

Once the tub is level, use support brackets or straps to secure the unit to the wall studs. Drill screws through the pre-drilled holes in the tub into the studs. Ensure the screws are tightly secured.

Apply plumber's putty around the drain and overflow holes on the underside of the tub. Carefully position the drain and overflow assembly through the holes and secure them with brass wire or plastic claws provided.

AD

Connect the Pipes

Before connecting the pipes, turn off the water supply to the bathroom. Use Teflon tape or pipe thread compound on threads to create a watertight seal. Connect the supply lines to the tub faucet and shower supply lines.

If you're using PEX piping, press fit or cinch the copper or PEX line into the compression fittings. Use a PEX expander tool or cinch ring to create a tight seal. Ensure all connections are secure and free of leaks.

Install the Showerhead and Faucet

Install the showerhead by hand-screwing it onto the shower arm. Wrap the threads with Teflon tape or use pipe joint compound for a watertight seal. Secure the showerhead with a lock nut.

Connect the faucet to the tub spout using the provided hardware. Ensure the faucet and spout are securely fastened and free of leaks. Test the water flow to ensure the fixtures are working correctly.

Tile and Grout (Optional)

If you choose to tile around the tub shower combo, install the cement backer board and waterproof membrane as mentioned earlier. Allow the membrane to dry (if applicable) before proceeding.

Tile the walls, using spacers to maintain even grout lines. Let the tile set for 24 hours, then remove spacers and apply grout. Clean the tile and allow the grout to dry according to the manufacturer's instructions.

Once your tub shower combo is installed, run a bath or shower to test for leaks and ensure proper functioning. Enjoy your new bathroom fixture! Regularly clean and maintain your tub shower combo to keep it looking its best and extend its lifespan.

AD