how to install tailgate assist

How to Easily Install a Tailgate Assist

By James Jackson
AD

Ever found yourself struggling to close your truck's tailgate, especially when your hands are full? A tailgate assist can make this task a breeze. This DIY guide will walk you through the process of installing a tailgate assist, making your life easier and more convenient.

Before we dive into the installation process, let's briefly discuss what a tailgate assist is and its benefits. A tailgate assist is a hydraulic or gas-strut system that helps counterbalance the weight of the tailgate, making it easier to open and close. Apart from the obvious convenience, it also helps reduce wear and tear on your truck's tailgate hinges and can prevent potential accidents, like the tailgate slamming shut on little ones or pets.

The DIY Tailgate Assist Installation Guide

This guide assumes you have basic DIY skills and tools. If you're unsure about any step, it's best to consult a professional. The steps may vary slightly depending on your vehicle make and model, but the general process is universal.

AD
First Mav Mod - Tailgate Assist!
First Mav Mod - Tailgate Assist!
F-150 Dee Zee Truck Tailgate Assist Shock Black Kit 2015-2019 Installation
F-150 Dee Zee Truck Tailgate Assist Shock Black Kit 2015-2019 Installation
8 Best Tailgate Assists for Pickup Trucks (June 2026) Complete Guide
8 Best Tailgate Assists for Pickup Trucks (June 2026) Complete Guide

First, ensure you have all the necessary tools and parts. Most kits come with the assist itself, mounting hardware, and necessary nuts and bolts. You'll also need tools like a drill, screwdriver, wrench, and possibly a pry bar to help remove the tailgate's trim.

Preparation and Removal of the Tailgate

Start by parking your truck on a level surface and gathering all your tools and parts. Locate the tailgate's reinforcement bar - this is the part that will hold the assist. Next, carefully remove the tailgate's interior trim. You might need to pry it off gently using a pry bar. Disconnect any wiring that may interfere with your work.

Ronin Factory Tailgate Assist
Ronin Factory Tailgate Assist
Install A Tailgate Assist Shock for Smooth Drops: How to Guide
Install A Tailgate Assist Shock for Smooth Drops: How to Guide

With the interior trim removed, you should see the reinforcement bar. This is where you'll mount the tailgate assist. Some vehicles may require drilling holes into the bar, while others might have pre-drilled holes. Follow your specific kit's instructions for this step.

Mounting the Tailgate Assist

With the holes drilled or located, you can now mount the tailgate assist. Most kits use bolts to secure the assist to the reinforcement bar. Use the correct size wrench to tighten the bolts, ensuring they're snug but not overtightened. This could cause premature wear or breakage of the assist.

AD

After mounting, check that the assist moves freely and isn't binding against any part of the tailgate. If it is, you may need to adjust its position slightly or file down any sharp edges on the reinforcement bar.

Installing the Gas Strut or Hydraulic Cylinder

Most tailgate assists use a gas strut or hydraulic cylinder. These devices create the counterbalancing effect. The installation process is similar for both, so we'll discuss them together.

Position the gas strut or cylinder in place. One end should be connected to the assist bracket, while the other end goes into a hole drilled into the tailgate. The hole should be positioned so that the strut extends or retracts smoothly as you open and close the tailgate.

AD

Connecting the Gas Strut or Hydraulic Cylinder

Once positioned, secure the gas strut or cylinder using the provided bolts. Remember, these parts are under pressure, so be careful when handling and tightening them. If possible, have a helper apply pressure to the tailgate while you tighten the bolts. This ensures the strut or cylinder is properly seated and won't leak.

After securing, test the tailgate's operation. It should open and close smoothly with little effort. If not, double-check that everything is positioned correctly and properly secured. If necessary, adjust the position or tension of the assist.

Reassembling the Tailgate

With the assist and strut or cylinder installed, it's time to reassemble the tailgate. Replace the interior trim, ensuring it fits back into place correctly. Reconnect any wiring that was previously disconnected.

AD

Before you close the tailgate, do a final test to ensure everything works as expected. Once satisfied, close the tailgate, and you're done! You've successfully installed a tailgate assist, making your truck's tailgate easier to manage.

Regularly check the tailgate assist over the next few weeks to ensure it's still functioning correctly. If not, you may need to adjust the tension or seek professional help. Happy trucking!

AD