how to install a tailgate handle

Step-by-Step: How to Install a Tailgate Handle

By Mark Anderson
AD

Fortifying your vehicle's security with a tailgate handle is a practical and straightforward enhancement that, when done correctly, adds a robust layer of safety. While it might initially seem daunting, installing a tailgate handle isn't as complex as you might think. In this comprehensive guide, we'll walk you through the process, ensuring you gain the skills and confidence to tackle this task.

Whether you're looking to upgrade your vehicle's aesthetic, bolster its security, or simply replace a worn-out handle, this installation guide will cater to your needs. So, let's dive into the world of DIY vehicle enhancement and learn how to install a tailgate handle safely and effectively.

Gather Your Tools and Preparation

Before we delve into the installation process, ensure you have all the necessary tools at your disposal. This will save you invaluable time and prevent unnecessary frustration. You'll need the following:

AD
How to remove repair and replace a tailgate handle that wont open - 2016 Subaru Forester
How to remove repair and replace a tailgate handle that wont open - 2016 Subaru Forester
How to Replace Tailgate Handle 98-11 Ford Ranger
How to Replace Tailgate Handle 98-11 Ford Ranger
DIY tailgate lock
DIY tailgate lock
  • New tailgate handle assembly
  • Drill (with a drill bit matching the size of your new handle's mounting bolts)
  • Screwdriver (matching the size of your new handle's mounting bolts)
  • Socket wrench
  • Tape measure
  • Marker
  • Rubber mallet
  • Utility knife

The quality of your tailgate handle assembly will significantly impact your vehicle's security. Ensure you're purchasing from a reputable supplier to avoid compromising your vehicle's safety.

Measurement and Alignment

Measuring and aligning your tailgate handle correctly is instrumental in ensuring a secure fit. Begin by removing the truck's tailgate. Use a tape measure to determine the center point where the new handle will be installed. Mark this point with a small line.

Transforming Your Truck: The Art of Tailgate Handle Relocation
Transforming Your Truck: The Art of Tailgate Handle Relocation
How to Manually Open a Stuck Tailgate Lock - Volkswagen Polo 9N
How to Manually Open a Stuck Tailgate Lock - Volkswagen Polo 9N

The mark should be at the same level as the pre-drilled holes on the tailgate, ensuring flush mounting with the truck's body. Use a drill bit matching the size of your new handle's mounting bolts and drill a hole on your marked center point. Double-check your measurements before proceeding to prevent misalignment.

Install the Tailgate Handle Assembly

First, insert the tailgate handle mechanism into the drilled hole from outside the truck. Ensure the mounted side faces the interior of the vehicle. Secure the assembly using the provided bolts. Tighten using a socket wrench, but be cautious not to overtighten and strip the threads.

AD

Once the handle is securely fastened, attach the lift assist arm from the inside of the tailgate. Align it with the handle and secure with bolts. Ensure the handle rotates smoothly and engages the vehicle's locking mechanism. Apply a lubricant if necessary, but avoid over-lubrication to prevent a greasy mess.

The Tailgate Lift Assist Mechanism

In most cases, installing a tailgate handle includes setting up a lift assist mechanism to help you open and close the heavy tailgate with ease. This addition significantly improves your vehicle's functionality.

Begin by marking the center of the tailgate's width on the top edge. This will guide your installation of the lift assist arm's mounting bracket. Drill a hole at the marked point that accommodates the bracket's mounting bolts.

AD

Install the Lift Assist Arm

The lift assist arm comes in two sections connected by a gas-filled cylinder. Mount the bracket to the tailgate, ensuring it is aligned vertically. Secure with bolts and tighten using a socket wrench. The bracket must be flush with the tailgate's surface for smooth operation.

Now, connect the lift assist arm to the tailgate handle mechanism. Ensure it's properly aligned and able to compress and extend smoothly. The arm should allow the tailgate to open and close with ease. If it's too stiff or too loose, double-check your alignment and tighten or loosen the bolts accordingly.

Test Your New Tailgate Handle

After installation, test your new tailgate handle and lift assist mechanism to ensure they work perfectly. Open and close the tailgate several times to confirm smooth operation. If there are any issues, double-check your installation and alignment.

AD

Finally, step back and admire your handiwork - you've successfully installed a new tailgate handle! Regularly scrutinize your installation to ensure the tailgate remains secure and the handle functions smoothly. Regular maintenance will prolong the life of your new tailgate handle and improve your vehicle's overall user experience.

AD