how to install sprite shower filter replacement

How to Install a Sprite Shower Filter Replacement

By Andrew Davis
AD

Replacing your showerhead filter, specifically a Sprite shower filter, is an essential maintenance task to ensure the consistent quality and health benefits of your shower water. This step-by-step guide will walk you through the process, making it a breeze to install your new filter.

Before we dive into the installation process, let's briefly understand why replacing your shower filter is vital. Sprite shower filters are designed to remove impurities,scale, and chlorine from your water. Over time, these filters can become clogged or lose their effectiveness, making it crucial to replace them regularly. So, let's get started!

Preparing for Installation

Before you begin, ensure you have the following tools and equipment:

AD
How to Replace the Sprite High Output Shower Filter Cartridge [VIDEO]
How to Replace the Sprite High Output Shower Filter Cartridge [VIDEO]
a man is fixing a shower filter in the bathroom with text overlay that reads, sprite slimline shower filter cartridge replacement
a man is fixing a shower filter in the bathroom with text overlay that reads, sprite slimline shower filter cartridge replacement
How to install a Sprite Slimline Shower Filter | My Water Filter Blog
How to install a Sprite Slimline Shower Filter | My Water Filter Blog
  • New Sprite shower filter
  • Adjustable wrench
  • Teflon tape or plumber's grease
  • Razor blade orange peeler (for removing old filter)

Turning Off Your Water Supply

Safety first! Turn off the cold water supply to your shower.

Locate the shower supply valve, usually located near the shower or on the wall nearby. It might be covered by a panel, so you may need to remove this for access. Once you've found it, turn the valve clockwise (to the right) to stop the water flow.

How to Replace the Cartridge in Your Sprite Shower Pure 7 Stage Hand Held Shower Filter
How to Replace the Cartridge in Your Sprite Shower Pure 7 Stage Hand Held Shower Filter
How to Change the Cartridge in Your Sprite Hose Shower Hose Filter [VIDEO]
How to Change the Cartridge in Your Sprite Hose Shower Hose Filter [VIDEO]

Preparing the Old Filter for Removal

Remove the showerhead. Use an adjustable wrench to gently rotate the showerhead counterclockwise. Be careful not to overtighten.

Now, let's remove the old filter. Wrap the razor blade or orange peeler with tape to protect your hands. Carefully cut through the old filter's plastic tie or zip-tie, then gently pull it off.

AD

Installing Your New Sprite Shower Filter

Now that you're ready, let's install your new filter.

First, apply Teflon tape or plumber's grease to the threads of the shower arm. This will ensure a tight connection and prevent leaks.

Attaching the Filter Adapter

Thread the filter adapter onto the shower arm, and hand-tighten only. Do not overtighten, as this can strip the threads or damage the adapter.

AD

If your shower arm has a ball joint, you may need to adjust it to facilitate a snug fit.

Installing the Filter Cartridge

Unwrap your new Sprite shower filter cartridge. It might be covered in a protective film; if so, remove it. Then, align the filter with the adapter opening and gently push it in until it's secure.

Do not rotate or turn the filter once it's in place. It should only be pushed in, not screwed on.

AD

That's it! You've successfully installed your Sprite shower filter replacement. Now, let's get your water supply back up and running:

Restoring Water Supply

Slowly turn the water supply valve counterclockwise (to the left) to resume the water flow.

Check for any leaks around the filter and adapter. If there are none, your new filter is installed and ready to go!

Remember, your Sprite shower filter should be replaced every 6-12 months, depending on your water quality and usage. Regularly maintaining your shower filter ensures clean, fresh water for a healthy shower experience. Enjoy your shower!

AD