Step-by-Step Guide: How to Install SimpliSafe Window Sensor
appartenant to your home security suite, SimpliSafe window sensors are a line of defense that ensures your windows are closed when your alarm is set. Installing these sensors is a straightforward process that requires minimal tools and no professional help. Here's a step-by-step guide to help you Install SimpliSafe window sensors like a pro.
Before you begin, ensure you have all the necessary components. Each SimpliSafe window sensor comes with a magnet and a sensor. You'll also need a screwdriver, double-sided tape (included with the sensors), and in some cases, a drill if your windows have thicker frames.
Preparing Your Window Sensors
Before mounting the window sensors, make sure the sensors and magnets are paired correctly. Each sensor is marked with a unique pairing code. Ensure the magnet and sensor have the same code to avoid confusion later on.
Once paired, place the magnet on the window frame where it will close against the window. Mark this position with a pencil to guide your final placement.
Mounting the Sensors
The next step is to mount the sensors on your windows. The method for this varies depending on the thickness of your window frame.
Thin Window Frames
For thin window frames, use the included double-sided tape to securely attach the sensor. Peel the protective layer off the tape, press the sensor firmly against the frame, and hold it for a few seconds to ensure a strong bond. The sensor should be positioned so that the magnet touches the sensor when the window is closed.
After mounting, test the sensor by closing and opening the window. The sensor should trigger the alarm when the window is opened. If not, adjust the sensor's position until it does.
Thick Window Frames
For thicker window frames, you'll need to drill a small hole to accommodate the sensor. Use a drill bit that's slightly smaller than the sensor's body. Drill a hole into the frame, ensuring it's deep enough for the sensor to sit flush with the frame.
Once the hole is drilled, insert the sensor into the hole and secure it with the provided screws. Again, test the sensor by opening and closing the window to ensure it's working correctly.
Connecting Your Window Sensors to Your SimpliSafe System
After all your window sensors are installed, it's time to connect them to your SimpliSafe system.
First, make sure your SimpliSafe base station is powered on and connected to your Wi-Fi network. Then, open the SimpliSafe app or log into your account on a web browser. Select 'Settings' and then 'Add Device'. Follow the on-screen instructions to add your window sensors to your system.
Naming Your Window Sensors
During the setup process, you'll be prompted to name your window sensors. Use descriptive names that indicate the room or location of the window, such as 'Kitchen Window' or 'Bedroom Window'. This will help you keep track of your sensors and understand the alerts you receive.
Once your sensors are named and added to your system, you can assign them to your monitoring zones and set up alerts in the SimpliSafe app.
Congratulations! You've successfully installed your SimpliSafe window sensors. You're now one step closer to comprehensive home protection. Regularly test your sensors to ensure they're working correctly and provide peace of mind knowing your windows are secure.