how to install price pfister bathroom faucet

How To Install A Price Pfister Bathroom Faucet

By David Brown
AD

Are you looking to upgrade your bathroom with a sleek, modern faucet? Installing a Price Pfister bathroom faucet isn't as daunting as it might seem. This comprehensive guide will walk you through the process, ensuring you achieve professional results every time.

Before you start, gather your tools: adjustable wrenches, an screwdriver, Teflon tape, and a basin wrench for those hard-to-reach bolts. Also, make sure you have your Price Pfister faucet set, which includes the spout, handles, mounting nuts, and hardware. If you're unsure about any step, Price Pfister's detailed instruction manuals provide expert guidance.

Preparation and Removal of Existing Faucet

Before installing your new Price Pfister faucet, prepare your workspace and remove the old faucet. Turn off the water supply valves under the sink to prevent any leaks or flooding. If you're unfamiliar with these valves, check under your sink and look for the shut-off valves near the faucet's supply lines.

AD
Tips to Install a Bathroom Faucet | The DIY Playbook
Tips to Install a Bathroom Faucet | The DIY Playbook
How To Install a Sink Faucet for Beginners
How To Install a Sink Faucet for Beginners
A Woman's Guide to Installing a Faucet - Sand and Sisal
A Woman's Guide to Installing a Faucet - Sand and Sisal

After turning off the water, open the faucet to drain any excess water in the lines. Now, you can start to remove the old faucet. Use a basin wrench to loosen and remove the mounting nuts securing the faucet to the sink. Once the nuts are off, carefully lift the faucet out of the sink. You may need to use a screwdriver or utility knife to remove any caulk or old plumber's putty.

Measuring and Preparing the Sink

Measure the center of your sink where you'll install the faucet. Most Price Pfister faucets come with templates to help you mark the mounting holes accurately. Using a drill with a suitable bit, drill holes at the marked spots, being careful not to go too deep and damage the sink's underside.

The Step-By-Step Guide to Replacing a Bathroom Faucet
The Step-By-Step Guide to Replacing a Bathroom Faucet
a faucet running water from a sink in a bathroom
a faucet running water from a sink in a bathroom

If your sink isn't pre-drilled, or the holes don't align with your new faucet, you'll need to drill new holes. Mark the center of the faucet's base, then use a drill bit slightly smaller than the faucet's mounting bolts to create the holes. Be sure to wear safety glasses during this process.

Assembling the Price Pfister Faucet

Begin by assembling the faucet according to Price Pfister's instructions. Attach the handles to the valve body, ensuring they're properly aligned with the spout. Apply a small amount of Teflon tape or plumber's putty to the threads of the mounting bolts to create a watertight seal between the faucet and the sink.

AD

Slide the faucet through the sink's mounting holes from underneath. Align the faucet with the marks you made earlier, and position the mounting nuts. Place a washer over the bolt, followed by the mounting nut. Tighten the nut using an adjustable wrench, but be careful not to overtighten, as this could damage the nut or faucet.

Connecting the Water Supply Lines

With the faucet securely mounted, it's time to connect the water supply lines. First, attach the supply tube to the hot and cold water shut-off valves under the sink, matching the color-coded marks on the valves and tubing. Use adjustable pliers or a monkey wrench to tighten the connection, but again, be careful not to overtighten.

Next, connect the other end of the supply tubes to the faucet's valve body. Make sure to match the hot and cold tubing connections to the correct inlet ports. Once again, use adjustable pliers to secure the connections, ensuring a tight fit with no leaks.

AD

Testing the Faucet

Before turning the water back on, double-check that all connections are secure and free from leaks. Wipe away any excess plumber's putty or Teflon tape. Now, turn the water supply valves back on slowly, allowing the water lines to fill and pressure to build.

Test the faucet by turning the handles to hot and cold. The water should flow smoothly without any leaks around the base of the faucet or from the supply lines. If there are no leaks and the water flows well, your new Price Pfister faucet is now ready to use!

Enjoy your newly installed Price Pfister bathroom faucet and the enhanced look and functionality it brings to your space. If you ever encounter any issues during or after installation, Price Pfister's customer service team stands ready to assist you.

AD
AD