how to disassemble a price pfister bathroom faucet

How to Disassemble a Price Pfister Bathroom Faucet

By Olivia Brown
AD

Are you planning to replace your old bathroom faucet or simply perform a routine maintenance? Either way, knowing how to disassemble a Price Pfister bathroom faucet is a handy skill to have. This step-by-step guide will walk you through the process in a safe and efficient manner. Remember, always turn off the water supply and allow the pipes to drain before starting.

Before you get started, gather your tools. You'll need an adjustable wrench, an Allen wrench, pliers, and a screwdriver. It's also a good idea to have some rags or towels on hand to keep things clean. Now, let's dive into the process.

Preparation and Water Supply Shutoff

Before you start, locate the water supply shutoff valves under your sink. Most homes have two knobs: one for hot water and one for cold. Turn both clockwise to shut off the water supply. If the knobs won't turn, you'll need to shut off the water supply at the main.

AD
The Step-By-Step Guide to Replacing a Bathroom Faucet
The Step-By-Step Guide to Replacing a Bathroom Faucet
Dripping or Leaking Price Pfister Bathroom Faucet Repair.
Dripping or Leaking Price Pfister Bathroom Faucet Repair.
a man is shaving the side of a sink with a pair of shears
a man is shaving the side of a sink with a pair of shears

Next, open the faucet to let any remaining water drain out. This will make it easier to work on the faucet and prevent any water from leaking onto your floor.

Removing the Escutcheons and Handle

The escutcheons are the decorative caps around your faucet handles. Use a screwdriver to remove them by unscrewing them from the faceplate. If they're stuck, you can use a utility knife to gently pry them off.

DIY: How to Replace and Install a Bathroom Sink Faucet
DIY: How to Replace and Install a Bathroom Sink Faucet
Tips to Install a Bathroom Faucet | The DIY Playbook
Tips to Install a Bathroom Faucet | The DIY Playbook

Once the escutcheons are removed, use an Allen wrench to unscrew the setscrew on the top of the handle. This will release the handle from the stem. Pull the handle straight out and up to remove it.

Disassembling the Stem and Bonnet

The stem is the long rod that connects the handle to the internal waterway. To remove it, you'll need to unscrew the bonnet, which is the nut that holds the stem in place. Use an adjustable wrench to turn the bonnet counterclockwise. You might need to use some force, so be careful not to damage the faucet.

AD

Once the bonnet is loose, you can screw it off by hand. With the bonnet removed, you should be able to pull the stem straight up and out of the faucet. If the stem is stuck, you can use pliers to gently pull it out.

Removing the Faucet Body

Now that the stem and bonnet are removed, you can remove the faucet body. Use an adjustable wrench to turn the locknut counterclockwise. Again, you might need to use some force, so be careful.

With the locknut removed, you can pull the faucet body straight out and up to remove it. You might need to use a little bit of force, but be careful not to damage the pipes. If the faucet is still not coming out, double-check that the water supply is completely turned off.

AD

Inspecting and Cleaning the Parts

With the faucet body removed, you can inspect the internal parts for signs of wear or damage. The most common problems are mineral deposits and rust. If you find any, you can clean them using a mixture of vinegar and water or a commercial cleaning product.

While you have the faucet disassembled, this is also a good time to check the O-rings and washers. If they're worn out, you can replace them with new ones to ensure a tight seal when you reinstall the faucet.

Reassembly and Reinstallation

Once you've inspected and cleaned the parts, you can begin reassembling the faucet. Start by replacing the O-rings and washers with new ones if necessary. Then, insert the stem back into the faucet body and secure it with the bonnet. Use an adjustable wrench to tighten the bonnet clockwise.

AD

Next, reinstall the faucet body by placing it into the hole in your sink and securing it with the locknut. Use an adjustable wrench to tighten the locknut clockwise. Finally, reinstall the handle and escutcheons, making sure to replace the setscrew and secure it with the Allen wrench.

That's it! You've successfully disassembled and reassembled your Price Pfister bathroom faucet. Now you can enjoy a beautiful and functional sink that's ready for years of use. Remember, always perform routine maintenance to keep your faucet in top shape and prevent any potential leaks or damage. Happy repairs!

AD