how to install oxberg door on billy bookcase

Learn How to Install Oxberg Door on Billy Bookcase: Step-by-Step Guide

By Emily Garcia
AD

If you're a fan of IKEA's versatile Billy bookcases, you might have considered giving your furniture a facelift with an Oxberg door. This stylish, double-sided door not only provides extra storage but also adds a touch of elegance to your space. Here's a step-by-step guide on how to install an Oxberg door on your Billy bookcase, ensuring a perfect fit and a professional finish.

Before you start, make sure to gather all the necessary tools and materials. You'll need a drill, a screwdriver (Philips HEAD), a ruler, a pencil, and the Oxberg door itself. Also, ensure you have the IKEA assembly instructions at hand, as they provide crucial specific dimensions and measurements.

Measuring and Preparing Your Billy Bookcase

Accuracy is key when it comes to measuring your bookcase for the Oxberg door. Using your ruler and pencil, mark the center line of the bookcase on both the inside and outside frames.

AD
Billy Oxberg Glass Door Bookcase Ideas That Feel Curated And Protected
Billy Oxberg Glass Door Bookcase Ideas That Feel Curated And Protected
an open door with the words how to install a bookcase door in 10 seconds
an open door with the words how to install a bookcase door in 10 seconds
An affordable DIY murphy door bookcase hack - IKEA Hackers
An affordable DIY murphy door bookcase hack - IKEA Hackers

Next, locate the_create a_for_between the two supports at the bottom of the bookcase. This space will determine where you need to attach the hinge side of the Oxberg door. Mark this spot, ensuring it's level and centered.

Marking the Hinge Positions

Now, you'll need to mark where the door's hinges will go. Grab the Oxberg door and place it on the inside of the bookcase, with the hinge side on the bottom rail. The top corner of the door should line up with the top of the bookcase, and the bottom of the door should start about an inch above the bottom of the bookcase.

IKEA Billy Bookcases and Oxberg Doors Transformed into a Chic Built-In Look
IKEA Billy Bookcases and Oxberg Doors Transformed into a Chic Built-In Look
Throw Some D’s On That! — How To Add Doors To A Bookcase — Kayla Simone Home
Throw Some D’s On That! — How To Add Doors To A Bookcase — Kayla Simone Home

Using the top and bottom edges of the door as guides, mark the center of each hinge on the inside of the bookcase. There should be three hinges, so mark the center of each. These marks indicate where you'll drill holes for the hinge screws.

Drilling Holes for the Hinges

Time to drill your marked holes. Using a drill bit that's slightly smaller than the hinge screws, drill holes at your marked hinge positions. Be sure to drill all the way through the wood, creating a pilot hole for each hinge screw.

AD

Once you've drilled the holes, attach the hinges to the back of the Oxberg door using the provided screws. Ensure the hinges are properly aligned and seated in their correct positions.

Attaching the Oxberg Door to Your Billy Bookcase

With the hinges now attached to the door, it's time to attach the door to the bookcase. Position the door in place, ensuring the hinges align with the holes you drilled earlier. The door should open and close smoothly when attached.

Using the provided screws, attach the door to the bookcase, securing it in place. Be careful not to overtighten the screws, as this could damage the wood or cause the door to warp.

AD

Securing the Door's Edge

To keep the door's edge from wobbling or rattling, you can add a small piece of wood along the bottom edge. Measure and cut a piece of wood to fit snugly along the bottom rail of the door, then attach it using screws. This will help secure the door in place and prevent any wobbling.

With the door now attached and secured, your Billy bookcase has been given a stunning new look with the Oxberg door. Sit back, admire your handiwork, and enjoy the extra storage space and updated aesthetic it provides. Happy crafting!

AD