how to install kwikset deadbolt

Step-by-Step: How to Install Kwikset Deadbolt

By Laura Thomas
AD

Upgrading your home's security can be as simple as installing a Kwikset deadbolt. Known for their reliable and sturdy locks, Kwikset offers a range of designs to suit various styles and needs. Before you start, ensure you have the necessary tools – a screwdriver, tape measure, and a pencil. This guide will walk you through the process, from preparation to completed installation, with clear, step-by-step instructions.

First, let's understand why Kwikset deadbolts are an excellent choice. Kwikset's SmartKey technology allows you to re-key your lock yourself in seconds if you lose a key or move to a new home. They also offer a wide variety of styles, from elegant satin nickel to modern brushed chrome, making them a popular choice for both homeowners and DIY enthusiasts.

Preparation and Unboxing

The first step in your installation process is to prepare and understand the components of your Kwikset deadbolt. Unbox your lock carefully and lay out all the pieces – the lock assembly, faceplate(s), latch assembly, strike plate, and screws. Ensure you have all the necessary hardware and tools for a smooth installation.

AD
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
someone is opening the door with an easy install button on it and pointing to the left
someone is opening the door with an easy install button on it and pointing to the left
How to Install a Deadbolt Lock
How to Install a Deadbolt Lock

Check the door where you'll be installing the lock. It should be a standard 1 3/8" door, as most Kwikset deadbolts are designed for this width. If your door is thicker or thinner, you may need to order a specialized lock or adapt your installation process.

Measuring and Positioning

Before marking your door, ensure the latch works smoothly. Open and close the door to make sure the latch retracts and extends without any issues. Now, mark the centerline of your doorknob's hole and the edge of your door. This will help you accurately position your deadbolt.

Kwikset Single Cylinder Deadbolt Lock Installation and Removal Instructions | Homesteady
Kwikset Single Cylinder Deadbolt Lock Installation and Removal Instructions | Homesteady
How to Install Deadbolts
How to Install Deadbolts

Using a horizontal line, mark the center of the doorknob on the face of the door. For the deadbolt, mark a point 3 1/2" above the doorknob center. Ensure you're measuring from the bottom of the door. The hole for the deadbolt must be level with the latched position of the doorstop.

Boring Holes in the Door

With your marks, you can now bore holes using a 2 1/8" drill bit for the doorknob and a 2 1/4" bit for the deadbolt. These sizes are standard for Kwikset locks. First, drill the doorknob hole, then chisel out excess wood to accommodate the roses (ornamental covers) that come with your lock. Next, drill the deadbolt hole, ensuring you're drilling into the center of your 3 1/2" mark.

AD

Use a chisel to adjust the hole depth if necessary. The lock must fit snugly against the door without binding. Re-measure and adjust until the lock fits smoothly, then check the latch is working properly again.

Measuring and Installing the Strike Plate

With the door held open, hold the strike plate against the door jamb. The lip of the strike plate should be flush with the face of the door jamb, while the hole should line up with the latch of your deadbolt. Mark the height of the strike plate's hole, and then bore a hole to the same depth as the strike plate's lip.

Install the strike plate, securing it with screws. Be sure not to overtighten, as this can cause the plate to warp and jam the latch. The strike plate should fit flush with the door jamb when the door is closed, allowing the deadbolt to retract and extend smoothly.

AD

Installing the Lock Assembly

Insert the deadbolt lock assembly into the hole you've bored in the door. The side with the latch assembly (the 'active' side) should match your door's hinge side. Ensure the lock is facing the correct way – the thumbturn should be on the inside of your door.

With the lock assembly in place, you can now install the faceplate(s). Hold the faceplate(s) against the door, lining up the screw holes with the knobs and deadbolt. Lightly mark the screw hole locations, remove the faceplate(s), and drill pilot holes. Install the faceplate(s) and knobs, securing them with screws.

Testing the Lock

Once installed, test your deadbolt by locking and unlocking it from both sides. The thumbturn on the inside should lock and unlock the deadbolt, while the key on the outside should also work. If everything is functioning as it should, congratulations – you've successfully installed your Kwikset deadbolt!

AD

If you encounter any issues, double-check your installation steps or consult Kwikset's online video tutorials for further assistance.

Regularly checking and maintaining your deadbolt will ensure its longevity and performance. However, if you ever need to replace your lock, remember that Kwikset's SmartKey technology makes this an easy, DIY-friendly process. Enjoy the peace of mind that comes with a secure, stylish Kwikset deadbolt and happy DIYing!

AD