how to install corner shower

Easy Guide: How to Install Corner Shower

By Jessica Garcia
AD

So, you've decided to upgrade your bathroom with a sleek, space-saving corner shower? Great choice! Installing a corner shower can be a rewarding DIY project that significantly enhances your bathroom's functionality and aesthetic. Here's a comprehensive guide to help you through the process, step by step.

Before you start, ensure you've got the right tools and materials. You'll need an adjustable wrench, screwdriver, drill, waterproof sealant, supply lines, Teflon tape, and, of course, your new corner shower unit.

Planning and Preparation

Your first task is to plan the layout and ensure your chosen shower unit fits in the corner. Measure the width and height of your available space and compare these dimensions with your shower's dimensions.

AD
How To Build a Mold-Resistant Shower Corner! ⚒️
How To Build a Mold-Resistant Shower Corner! ⚒️
How to Install the Delta® Neo Angle Corner Shower Base
How to Install the Delta® Neo Angle Corner Shower Base
Puertas de ducha, en esquina
Puertas de ducha, en esquina

Corner showers come in various materials, such as acrylic, fiberglass, or ceramic. Each has its pros and cons, so consider factors like durability, maintenance, and style when making your decision.

Gather Your Tools and Materials

Assemble your tools and supplies to have everything nearby during the installation. Your tools will likely include an adjustable wrench, screwdriver, drill, and utility knife. As for materials, you'll need waterproof sealant, supply lines, and Teflon tape.

How to Install a Shower Enclosure | Mitre 10 Easy As DIY
How to Install a Shower Enclosure | Mitre 10 Easy As DIY

Check if your shower unit comes with an installation kit. If not, you might need to purchase one separately, as it often includes necessary hardware and accessories.

Check Your Plumbing

Before you begin, turn off your home's water supply. Locate the main water shutoff valve, usually near your water heater or at the perimeter of your home. Once the water is off, open your shower faucet to relieve remaining pressure.

AD

Inspect your existing plumbing connections. If they're in good condition, you may be able to reuse them. If not, consider replacing them to ensure a secure and watertight connection.

Removing the Old Shower

If you're replacing an existing shower, you'll need to remove it first. Start by turning off the power to the area to avoid accidents. Then, remove any tiles or tub surround around the old shower.

Using a pry bar and hammer, carefully remove the shower base. You may need to cut and disconnect the supply lines and drainpipe with a hacksaw. Once removed, clean the area thoroughly to prepare for your new corner shower.

AD

Install the New Shower Base

Position the new shower base in the corner, ensuring it's level and square. Mark the location of the drain and cut out an opening in the subfloor using a reciprocating saw. Ensure the drain is aligned with the shower's center.

Apply a generous amount of waterproof sealant around the perimeter of the base and on the drain flange. Place the base into position and press firmly, ensuring it's level. Secure the base using screws driven through the provided holes.

Install the Shower Walls

Now, install your shower walls. Lay out the three walls and determine the best sequence for installation. Start with the longest wall, applying sealant to the edges before positioning it against the base and any adjacent walls.

AD

Align the wall clamps or screws provided, ensuring they're level. Secure the wall to the base and any adjacent walls using screws or clamps. Repeat the process for the remaining walls, ensuring they fit snugly together and are securely fastened.

Plumbing and Final Touches

With the shower base and walls installed, it's time to reconnect your plumbing. Assuming you reused your existing supply lines, apply Teflon tape to the threaded ends and reattach them to the shower valve.

relativity. Check for leaks, and if necessary, tighten connections or apply additional sealant. Turn the water supply back on and test your new corner shower, ensuring it drains correctly and operates as expected.

Add Touch-Up Details

Once your shower is functionally sound, it's time for the cosmetic touches. If you chose a tiled or curtain option, install your chosen liner or tiles, ensuring they're level and well-supported.

Install any accessories like showerheads, faucets, or Shelving. Ensure these are securely fastened and functional. Give your shower a thorough cleaning, and it's ready to enjoy!

Congratulations, you've successfully installed your new corner shower! Enjoy the benefits of your new bathroom upgrade. Don't forget, regular maintenance like cleaning and inspecting for leaks will help your shower stay functional and beautiful for years to come.

AD