how to install commercial toilet

How to Install a Commercial Toilet: A Step-by-Step Guide

By Richard Wilson
AD

Installing a commercial toilet may seem like a daunting task, but with the right tools and steps, you can easily upgrade your space. Whether you're renovating a public restroom or updating your home's guest bathroom, we've got you covered with this comprehensive guide. Let's dive in and learn how to install a commercial toilet correctly.

Before you start, make sure to have all necessary materials, including your new toilet, silicone caulk, Teflon tape, rubber gloves, a putty knife, a hacksaw, an adjustable wrench, and pliers. Safety first, so ensure you're working in a well-ventilated area and have proper protection for your hands and eyes.

Preparation and Dismantling

Begin by turning off the water supply and Flushing the toilet to release any remaining water. Disconnect the water supply line, using an adjustable wrench, and carefully remove the old toilet.

AD
a white toilet sitting inside of a bathroom next to a wall with the words install a toilet the easy way
a white toilet sitting inside of a bathroom next to a wall with the words install a toilet the easy way
How to Install Commercial Toilet Seats
How to Install Commercial Toilet Seats
How to Install a Toilet | Madness & Method
How to Install a Toilet | Madness & Method

Inspect the wax ring and ensure it's in good condition. If not, replace it with a new one to create a proper seal between the toilet and the drain. Clean the area around the drain and remove any remaining caulk.

Assembling the Toilet

Place your new toilet on its side and unscrew the bolts at the base, saving them for later use. Attach the wax ring to the horn or base of the toilet, ensuring it's centered and secure.

a man kneeling down on the floor with a laptop computer in it's lap
a man kneeling down on the floor with a laptop computer in it's lap
How To Install A Toilet - Beginner's Guide With STEP-BY-STEP INSTRUCTIONS
How To Install A Toilet - Beginner's Guide With STEP-BY-STEP INSTRUCTIONS

Lay the horn or base of the toilet onto the bolts. Carefully align the horn with the drain and ensure the base is level. Once properly aligned, fasten the bolts loosely using an adjustable wrench.

Securing and Connecting

Snug up the bolts, but avoid overtightening to prevent cracking the ceramic. Secure the toilet to the floor using the provided mounting bolts and washers. Use a small piece of Teflon tape on the threaded bolts to prevent leaks.

AD

Connect the water supply line to the toilet's water inlet, using an adjustable wrench. Ensure the connection is tight, and there are no leaks. Turn on the water supply and flush the toilet to test for leaks and proper functionality.

Finishing Touches

Apply a bead of silicone caulk around the base of the toilet, creating a seal between the toilet and the floor. Allow the caulk to dry completely before using the toilet.

Clean up the work area, and dispose of any remaining materials properly. Your job is now complete, and you have successfully installed a commercial toilet.

AD

Congratulations! Now that your new toilet is in place, take some time to admire your upgraded space. If you're a business owner, let your customers enjoy the benefits of your facility's improved cleanliness and functionality. If you're a homeowner, revel in the comfort and convenience of your newly updated bathroom.

AD