how to install bicycle hand grips

Easy Steps: How to Install Bicycle Hand Grips

By Matthew Taylor
AD

When it comes to enhancing your bicycle's comfort and grip, installing new hand grips is an easy and cost-effective solution. They're available in a variety of materials like Kraton, leather, foam, and cork, each offering different levels of comfort, vibration dampening, and durability. But before you choose and buy, let's dive into a step-by-step guide on how to install bicycle hand grips, a task that's as easy as riding a bike.

Before you start, ensure you have the right tools at hand. You'll need your new bicycle hand grips, a pair of safety gloves, a utility knife, an old credit card or a thin, flat tool, and may need to use a pair of pliers or a grip superglue depending on the grip type.

Selecting and Preparing Your New Hand Grips

Selecting the right hand grips depends on your riding style and personal preference. Mountain bikers, for instance, might prefer grips with more cushioning for rough trails, while road bikers might opt for something sleek and lightweight.

AD
How to Replace Handlebar Grips
How to Replace Handlebar Grips
Easiest Way To Remove Bike Grips
Easiest Way To Remove Bike Grips
Quick fix for a perfect bike grip 🚲
Quick fix for a perfect bike grip 🚲

Start by preparing your new grips. If they're not pre-cut, use a utility knife to carefully slice through the grip at the appropriate length for your handlebar. Make sure to keep your fingers away from the blade while doing this.

Removing Your Old Grips

Using a utility knife or a thin, flat tool like an old credit card, carefully cut through the old grip's material lengthwise. Then, either peel or cut away the old grip. If it's particularly stubborn, you might need to use a combination of a utility knife and pliers.

DIY Bike Grips
DIY Bike Grips
How To Remove/Install Bike Handlebar Grips
How To Remove/Install Bike Handlebar Grips

If your old grips are slick with sweat or dirt, clean the handlebar with rubbing alcohol before moving on to the next step. Grease can make your new grips slippery and may cause them to shift while riding.

Aligning and Slipping On Your New Grips

Start by aligning the grips with the handlebar's raised collar, which is usually where you'd place your thumb. Next, begins slipping the grip onto the handlebar. If it's too tight, try wiggling them or applying a little pressure with your thumbs.

AD

Once you've got one end on, slip your finger between the grip and handlebar and work it around, slowly pulling the grip onto the handlebar. If you're using grip superglue, apply a small amount on the handlebar before slipping on the grip. Allow it to cure for the indicated time before riding.

Installing Lock-on Grips

Lock-on grips are always ready to install out of the box. Unlike traditional grips, they don't require cutting or trimming. They use clamps on the inside to secure themselves to the handlebar, keeping them in place even under rigorous trail conditions.

They're particularly useful for mountain bikers who need a secure grip while traversing rough terrains. However, they can sometimes feel less comfortable due to their rigid nature, and may not fit as well on dropped handlebars.

AD

Locking On Your Grips

First, squeeze the spring-loaded clamps on the inside of the lock-on grips to open them. Slip them onto the handlebar as far as they can go. Next, position the grip, ensuring it's aligned with the handlebar's raised collar. Then, let go of the clamp, allowing it to snap shut.

A fully locked grip should be very tight, with very little play between the grip and the handlebar. If it's too loose, you might need to squeeze the clamp tighter or use lock-on grip pliers to secure it further. If it's too tight, use pliers to carefully loosen it.

Once your new hand grips are installed and secure, it's time to hit the road or trail! Regularly inspecting your grips can help extend their life, as well as ensure they're still providing the best possible grip for your riding style. Happy cycling!

AD
AD