how to change motorcycle grips

How to Change Motorcycle Grips: Easy Steps & Top Picks

By Brian Thompson
AD

Are you tired of having your hands cramp up on your motorcycle rides due to uncomfortable grips? Or perhaps you're just looking to upgrade the aesthetics of your ride? Changing motorcycle grips can significantly enhance both your riding experience and the look of your bike. In this guide, we'll walk you through the process step-by-step, ensuring you'll be gripping the open road with confidence in no time.

Before we delve into the nitty-gritty, let's quickly discuss why you might want to change your motorcycle grips. Apart from the comfort factor, changing grips can also help improve roadfeel, enhance control, and even make your bike look more badass.

Preparation and Tools

Changing motorcycle grips is a relatively straightforward task that can be accomplished with minimal tools. Here's what you'll need:

AD
a person working on an orange and black motorcycle
a person working on an orange and black motorcycle
How To Replace Grips On A Motorcycle: An Easy Guide | Wind Burned Eyes
How To Replace Grips On A Motorcycle: An Easy Guide | Wind Burned Eyes
How To Fix Sticky Handlebar Grips On Motorcycles
How To Fix Sticky Handlebar Grips On Motorcycles

1. New grips (measure your bike's handlebar diameter before purchasing) 2. Degreaser or rubbing alcohol 3. Towel or old cloth 4. Razor blade or sharp knife 5. Hairdryer (optional, but helpful) 6. Screwdriver or Allen wrench (to remove bar ends, if applicable) 7. New grip glue (optional, for added security)

Choosing the Right Grips

When selecting new grips, consider the riding style and conditions. For instance, dual-sport or adventure riders might prefer grips with an aggressive tread pattern for better control in rough terrain, while urban commuters might prioritize comfort and vibration damping.

How to Replace Grips on a Harley-Davidson by J&P Cycles
How to Replace Grips on a Harley-Davidson by J&P Cycles
How to Install New Motorcycle Handlebar Grips
How to Install New Motorcycle Handlebar Grips

Also, ensure the grips fit your bike's handlebar diameter. Standard sizes range from about 7/8" to 1 1/4", but it's always best to measure first.

Preparing Your Hands

Before you start, make sure your hands are clean and dry. Oil and debris can make it difficult to get a good grip on your new grips.

AD

If your current grips are extremely worn or nasty, you might want to wear gloves to protect your hands. Safety first, folks!

Removing the Old Grips

Now that you're prepared, let's start by removing the old grips.

First, if your bike has bar ends, remove them using a screwdriver or Allen wrench. Set the ends aside in a safe place where you won't lose them.

AD

Cutting the Old Grips

Next, use a razor blade or sharp knife to cut through the old grips. Start at the end of the grip and cut downward, creating a single, long slit. Be careful not to cut yourself or slice into your bike's Switchgear.

Once you've made the initial cut, you should be able to easily peel off the old grips. If they're stuck, try using a hairdryer on the warm setting to heat up the grip material, making it more pliable.

Cleaning the Bars

Now that the old grips are off, it's time to clean the handlebars. Use a degreaser or rubbing alcohol and an old cloth or towel to remove any dirt, oil, or old grip glue.

AD

This step is crucial because new grips won't adhere properly to a dirty, greasy surface.)

Installing the New Grips

Now comes the fun part - installing those shiny new grips!

First, ensure your hands are clean and dry again. This will help you maintain a good grip on the new grips.

Apply Grip Glue (Optional)

If you're using grip glue, now's the time to apply it to the inside of your new grips. Follow the instructions on the package, but typically, you'll just need to spread an even coat around the inside of the grip.

Be careful not to get too much glue on your fingers, as this can make the grip installation more difficult. Also, avoid getting glue on the outside of the grip, as this can make the grip slippery.

Slipping On the New Grip

Now, it's time to slip on your new grip. Align the grip with the end of the handlebar, and starting from the end, carefully stretch the grip over the bar.

Take your time and try to maintain as much tension as possible to avoid wrinkles. If you hit a snag, backtrack a bit and readjust the grip. Once past the thickest part of the handgrip, it should slip on with ease.

Stretching the Grip

With the grip on, use your hands to slowly and gently stretch it into place. Work your way along the grip, smoothing out any wrinkles or bubbles. For stubborn creases, use the hairdryer trick again to warm up the grip material.

If you're having trouble achieving a wrinkle-free finish, try using a rubber band or piece of string to temporarily secure the grip in place while you work on another section.

Trimming the Excess

Once the grip is in place, use a razor blade or sharp knife to carefully trim off any excess grip material. Make sure to cut at an angle, following the grip's natural curve. Be cautious not to cut the grip itself or your bike's controls.

If you did a good job smoothing and stretching, you shouldn't have much excess to trim. But if you do, don't worry - this happens to the best of us.

Finishing Up

With the grip in place, take a moment to admire your handiwork. You've just improved the look and feel of your ride, and best of all, you did it yourself!

If you removed bar ends earlier, now's the time to put them back on. Secure them tightly, but be careful not to overtighten and damage the threads.

Now that you've learned how to change motorcycle grips, you're ready to tackle this DIY project on your own. With a little patience and attention to detail, you can upgrade your bike's styling and comfort in no time. So, what are you waiting for? Get out there and start gripping that open road!

AD