how to install andersen storm door handle

Stepping Up Your Security: A Comprehensive Guide to Installing an Andersen Storm Door Handle

By Mark Harris
AD

Mastering the installation of an Andersen storm door handle might seem daunting initially, but with the right guidance, it's a task that any homeowner can accomplish. Let's walk you through it, step by step.

Before we begin, gather your tools: a screwdriver, measuring tape, level, pencil, and the Andersen storm door hardware kit that came with your door. Safety first, ensure there's no risk of injury by clearing the work area and turning off any nearby power.

Preparing the Door and Handle

Begin by ensuring your storm door and handle are clean and free from any debris. This guarantees a smooth installation process with better grip and alignment.

AD
How to install the handle set on Andersen® 4000 & 3000 Series Storm Doors | Andersen Windows
How to install the handle set on Andersen® 4000 & 3000 Series Storm Doors | Andersen Windows
How to Install a Storm Door Handle Set [1080p]
How to Install a Storm Door Handle Set [1080p]
How To Replace A Storm Door Handle – Storables
How To Replace A Storm Door Handle – Storables

Next, remove the existing handle from the storm door. Use your screwdriver to remove the screws, keeping track of their sizes and placement for reinstallation later.

Measuring for the New Handle

Measure the door's width using your tape measure. This step is crucial to ensure the new handle you've purchased fits your door accurately. Andersen handles come in standard sizes, but it's always better to double-check.

How-to Install a QuickFit Handle set on a LARSON door
How-to Install a QuickFit Handle set on a LARSON door
a hand holding a cordless drill and screwdriver in front of a door
a hand holding a cordless drill and screwdriver in front of a door

Once you've confirmed the size, mark the center point horizontally on the door's stile (vertical edge) using your pencil. This will help you align the new handle correctly.

Installing the New Handle

Now, compare your measurements with the handle's mount to ensure they're aligned. The center point you marked earlier should be at the same height as the handle's center when it's properly aligned.

AD

Using your screwdriver, carefully attach the handle using the provided screws. Ensure you're using the correct screw size and don't overtighten, as this can cause damage to the handle or the door itself.

Attaching the Latch and Strike

Now that the handle is secured, it's time to attach the latch and strike plate. The latch secures the door, while the strike plate receives the latch, ensuring a smooth opening and closing motion.

Your Andersen storm door kit should include latch and strike plates. If not, you'll need to purchase these separately to ensure they're compatible with your door and handle.

AD

Installing the Latch

Position the latch on the door's edge, aligning it with the handle. Ensure the latch protrudes enough to engage with the strike plate on the door jamb.

Secure the latch in place using the provided screws. Once again, ensure you're using the correct screw size and don't overtighten.

Installing the Strike Plate

Measure and mark the center point on the door jamb, aligning it with the latch's position. This will ensure the door latches properly when closed.

AD

Position the strike plate over the mark and secure it in place using the provided screws. Make sure it's level and properly aligned with the latch for a smooth operation.

Congratulations, you've successfully installed your new Andersen storm door handle! Enjoy the improved aesthetics and functionality of your door. Regularly inspect your door hardware for any damage or wear to ensure its longevity. HappyDIYing!

AD