how to install a spud on a toilet

How to Install a Spud on a Toilet

By Joseph Clark
AD

Tired of leaks and tacky-looking spuds in your toilet? It's time to replace that old toilet seat with a shiny new spud. In this comprehensive guide, we'll walk you through the process of installing a spud on a toilet, ensuring a perfect fit and years of trouble-free service.

Before you start, gather your tools: a screwdriver, a new toilet seat (spud), and some handy silicone lubricant. We'll assume you're working with a standard toilet and seat. If you're unsure about any part of the process, don't hesitate to call a professional plumber.

Removing the Old Toilet Seat

The first step is to remove the old toilet seat. This might seem daunting, but it's fairly straightforward. Start by disconnecting the toilet seat from the hinges. You'll likely find two screws under the seat and two under the lid, holding them in place.

AD
a white toilet sitting inside of a bathroom next to a wall with the words install a toilet the easy way
a white toilet sitting inside of a bathroom next to a wall with the words install a toilet the easy way
a toilet with the words fix a wobbly toilet on it's wall behind it
a toilet with the words fix a wobbly toilet on it's wall behind it
How to fit a toilet on new floor! #asmr #plumping #diy #howto #subscribe #youtubeshorts #plumber
How to fit a toilet on new floor! #asmr #plumping #diy #howto #subscribe #youtubeshorts #plumber

Using your screwdriver, carefully unscrew them and set them aside. With the screws removed, the old toilet seat and lid should lift right off. If you're replacing the entire assembly, including the hinges, you'll also need to unscrew those. But don't worry, most modern toilet seats include hinges.

Preparing the Toilet Bowl

After removing the old seat, wipe down the area where the new seat will rest. A clean surface will ensure the new seat adheres properly and prevents leaks. If your toilet bowl has any mineral deposits or stains, use a Clark's rubbereraser or a suitable cleaning agent to remove them.

How to Replace a Toilet | Easy DIY Bathroom Project
How to Replace a Toilet | Easy DIY Bathroom Project
How To Install A Toilet
How To Install A Toilet

While you're at it, give the area around the mounting bolts a good cleaning as well. This will make installation smoother and ensure a good grip for the seat screws.

Aligning the New Toilet Seat

Now it's time to install the new toilet seat. Start by positioning the seat over the toilet bowl, ensuring it's centered and lined up with the mounting bolts. Most modern toilet seats come with pre-drilled holes that should line up perfectly with your bolts.

AD

Securing the New Toilet Seat

With the seat in position, it's time to secure it to the toilet bowl. Grab your screwdriver and the seat screws. Locate the installation instructions that came with your new seat. Different seats may require different installation methods. Some may use factory-standard screws, while others might require you to insert and tighten the screws from the bottom.

If you're using a standard toilet seat, start by placing the screws through the existing holes from the top, then secure them with a screwdriver. Tighten them firmly, but be careful not to over-tighten and strip the screw threads. Once secure, loosen the screws slightly to ensure the seat isn't too tight and can move freely on the hinges.

Installing the Hinges

If your new toilet seat includes hinges, now's the time to install them. Position the hinge posts over the mounting bolts and align them with the hinge recesses on the seat. Once aligned, press the hinges into place, ensuring they're fully seated and secure.

With the hinges installed, give the seat a gentle wiggle to ensure it moves smoothly on the hinges. If it feels too tight or wobbles, you may need to adjust the screws slightly. Remember, you want a snug fit, but not so tight that the seat cracks or becomes difficult to operate.

Finishing Up

With the seat secured, give it another wipe down to remove any debris or fingerprints. Now's also a good time to apply some lubricant to the hinge bolts. This will help prevent rust and ensure smooth operation.

Close the lid and give the new spud a try. You should hear a satisfying click as it locks into place. If it doesn't lock or feels loose, you might need to tighten the screws again. But don't worry, that's just part of the learning process.

Congratulations! You've successfully installed a new toilet seat. Regular maintenance and a little bit of elbow grease will ensure it stays in good shape for years to come. So, the next time you notice a wobble or a leak, don't be tempted to DIY. Simply follow these steps and enjoy your shiny new toilet seat.

AD